Dynalink RTA300 Quick Setup Manual - Page 3

Browse online or download pdf Quick Setup Manual for Network Router Dynalink RTA300. Dynalink RTA300 16 pages. Adsl router

Print Page

ADSL Router Quick Set-up Guide

Default Configuration for New Zealand

This Router is shipped with the following factory default settings.

Router IP address

Subnet mask

VPI

VCI

Encapsulation

NAT

DSL line mode

WAN IP

DHCP

UPnP IGD

Security:

Firewall

Intrusion Detection

Router configuration & management:

Administrative User name

Administrative Password

Telnet password

Users must not change the VPI, VCI, Encapsulation or NAT settings. DSL line

mode can be set to either auto or G.dmt. Advanced users who have other setup

preferences should refer to the User's Manual.

Before you start

Make sure your computer has the following installed:

An Ethernet or USB port (see 'Choose your connection option' below)

TCP/IP protocol

A web browser, Internet Explorer 5.0/Netscape 6 or better

Obtain the following information from your ISP:

Public IP address (Note: only required if you purchase a static IP)

DNS server IP address (if specified by ISP)

Choose your connection option:

Ethernet (for a standalone computer)

Connect using the enclosed "straight through" Ethernet cable.

192.168.1.1

255.255.255.0

100

PPPoA VC-MUX

enabled

auto

dynamic

enabled

disabled

off

disabled

admin

(do not change)