Dynalink 56K e-modem III Quick Setup Manual - Page 5

Browse online or download pdf Quick Setup Manual for Modem Dynalink 56K e-modem III. Dynalink 56K e-modem III 6 pages. 56k internal modem
Also for Dynalink 56K e-modem III: Quick Setup Manual (9 pages)

Print Page

Once you are connected to the Internet, you will find further information on Dynalink

Modem's World Wide Web site at www.dynalink.com.au/support (Australia) or

www.dynalink.co.nz/support (NZ). Here you can learn how to setup the BVRP Classic

PhoneTools

Software, extensive troubleshooting information, downloads and much

other information.

BVRP Classsic Phonetools

FAX/TAM Software (Optional)

The Classic PhoneTools

modem as a Telephone Answering Machine (TAM). For sending and receiving faxes

via the modem, you may use the free software Mircosoft Fax that comes with Windows.

To request the software, please return to the previous menu and click the FAX SOFTWARE

button if you are reading this Quick Set-Up Guide from the supplied Dynalink CD.

Troubleshooting

NO DIALTONE is reported

Check the modem country selection is set to your country as outlined in

Step 3: Country Selection.

Click Start–Settings-Control Panel-Modems–Properties–Connection–Advanced.

Under Extra Settings, enter X3.

Check you are using the phone cable that came with the modem - not a phone

cable normally used with a phone.

Check the phone cable is plugged into the LINE jack of the modem, and the other

end is plugged into a phone jack on the wall.

Eliminate any cables or devices between the phone cable and the wall jack, such

as fax switches or extension phone cables.

Windows does not detect the modem

Check the modem is firmly inserted into the motherboard.

Try inserting the modem into a different PCI slot.

When clicking the More Info button, a table of ATI commands is not reported

Check you have clicked on the COM port your modem is setup on.

Ensure no other programmes are using the modem - exit all programmes before

running More Info.

Check for conflicts under Device Manager (click Start-Settings-Control Panel-

System-Device Manager). If a conflict does exist, it is recommended you remove

the offending devices and reinstall them.

software is available on request if you wish to use the