Dynalink RTA1025WV6 Quick Setup Manual - Page 4
Browse online or download pdf Quick Setup Manual for Modem Dynalink RTA1025WV6. Dynalink RTA1025WV6 4 pages. Adsl2+ wireless modem router
Print PageTroubleshooting
Q1.
Cannot connect to the Internet?
• If the DSL light is off this means the broadband service may not have been activated on your telephone line.
Make sure the Phone Cable is plugged into the DSL socket on the modem and the other end is plugged into
the wall socket. If it is, contact your Internet provider to confirm that the broadband service has been
correctly set up.
Q2.
Cannot browse the Internet?
• Check that the modem's "DSL" light is on. Check that the "Ethernet" cable is firmly plugged in.
• Perform a PING test. In Windows XP, Vista or Windows 7, click "Start" then "Run". Type "Command" then
click OK. Type ping "192.168.1.1" then press "Enter". The response should resemble:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=4ms TTL=30
If there is a similar response, the router is communicating with your computer correctly and the problem lies
elsewhere. If the result is Request timed out, there may be a network problem. Check that the "Ethernet"
cable is firmly plugged in.
• Disable any personal firewall or virus checker temporarily.
• If you are using Internet Explorer, go to "Tools" on the browser menu and select "Internet options" then
"Security" and reset the security level by clicking on the "Default Level" button.
Indicator lights
There are 8 indicators on the front panel. (See Figure 3)
Function
WLAN
LAN 1-4
PPP
DSL
PWR (Power)
Warranty
Dynalink warrants this product against defects in materials and workmanship for a period of twelve months
from the original date of purchase. Dynalink will, at its discretion, repair or replace the faulty unit, free of
charge, provided it is returned to us with proof of purchase from an authorised dealer within the warranty
period. Return delivery after repair will be paid for by Dynalink.
We reserve the right not to repair or replace goods that:
» have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.
» have been subjected to a power surge from other equipment or other external factors.
» have been altered or modified.
Colour
Off
Flashing Green
Solid Green
Off
Flashing Green
Solid Green
Red
Solid Green
Off
Slow Flashing Green
Solid Green
Off
Solid Green
Sold Red
Flashing Red
Definition
Wireless connection is not detected
Wireless connection is transferring data
Wireless connection is ready
Ethernet connection is not detected
Ethernet connection is transferring data
Ethernet connection is ready
Modem is not online
Modem is online
No DSL Signal is detected
DSL connection in progress
DSL Connected
Power is off
Power is on and the modem is operating normally
Power is on and a test in progress
Power on failure if this light remains solid
Modem firmware upgrade is in progress