Automation Direct PSM24-BCM360S Operating Instructions Manual - Page 7

Browse online or download pdf Operating Instructions Manual for Control Unit Automation Direct PSM24-BCM360S. Automation Direct PSM24-BCM360S 8 pages. Rhino battery control module

Print Page
PSM24-BCM360S Dimensions
Bottom view
DC Input OK
1
2
Bat. OK
3
4
DC Output OK
5
6
Remote On/Off
7
8
Temp. Sensor
9
(TS)
10

General Specifications

Battery Protection
Status Signals
Rating per Relay Contact
Remote Link Wire 0.5m
Remote ON/OFF
Temperature
Humidity
Isolation
Over-temperature Protection
Vibration
Shock
Enclosure Rating
Enclosure Material
Mounting
Connection
Note: Unless otherwise stated, all specifications are valid at nominal input voltage, full load and +25°C after warmup time.
Specification
Electromagnetic Compatibility (EMC), Emissions
Electromagnetic Compatibility (EMC), Immunity
Pollution Degree
7
RHINO Battery Control Module PSM24-BCM360S Operating Instructions
4th Edition 06/18
Top view
Front view
General Specifications
Over voltage, deep discharge, overcharge, short-circuit and reverse connection (built-in fuse)
DC-OK input, DC-OK output, BAT OK all relay contact closed at status OK; All LEDs on (green) at status OK
30 VDC / 0.6 A max.
One cable included with PSM24-BCM360S module
by external contact: ON = J5.7 + J5.8 not shorted
OFF = J5.7 + J5.8 shorted
Operating (ambient): -25°C to + 70°C max (-13°F to 158°F). Above +40°C(104°F) load derating 1.5%/°C
Storage (non-operating): -25°C to + 85°C max (-13°F to 185°F).
Temperature drift: 0.02%/°C.
Cooling: convection, no internal fan
95% (non-condensing) relative humidity maximum
According to IEC/EN 60950-1, UL 60950-1, EN50178, EN60204
When the TS-1 cable is used, the battery charging function will stop if the temperature sensor indicates the battery is over temperature. When the
temperature sensor detects that the temperature has returned to a safe range, normal battery charging operation will automatically restart.
IEC 60068-2-6: 3 axis, sine sweep, 10-55 Hz, 1g, 1 oct/min
IEC 60068-2-27: 3 axis, 15g half sine, 11ms
IP20 (IEC 529)
Aluminum (chassis) / zinc plated steel (cover)
Snap-on with self-locking spring for 35mm DIN rails per EN 50022-35x15/75, or wall mount with bracket (PSM-PANEL1 sold separately)
Pluggable screw terminals (plugs included) 2 terminals per output
General Specifications – Safety Standards
Standard
EMC, Emissions
EMC, Immunity
2
Side view
Document Number
Corresponds to connected units ( no internal switching device)
Corresponds to connected units ( no internal switching device)
1 - 8 0 0 - 6 3 3 - 0 4 0 5
Unit: mm [inches]