Dynalite DMC810GL Installation Manual - Page 9

Browse online or download pdf Installation Manual for Controller Dynalite DMC810GL. Dynalite DMC810GL 12 pages. Leading edge dimmer/hf ballast controller

Print Page

1. Useful Dynet Op Codes

.........................................................................................................................

STEP 1:

STEP 2:

STEP 3:

.........................................................................................................................

STEP 1:

STEP 2:

.........................................................................................................................

hold down programming of presets

To program preset scenes, press MANUAL

Adjust channel levels using sliders.

Press and hold down the button to which the settings are

to be stored for at least 5 seconds. Repeat this process

for the other presets. The preset scenes are now stored

and can be recalled by pressing the relevant buttons on

this panel, or other panels in the same area.

one touch button operation

With a simple button push you can toggle between on and off.

By holding your finger on the button you can raise and lower the

lighting circuit or circuits that are connected to the button. To

alternate between up and down stop pushing for a moment and

then hold down again. The level that is selected is saved and

restored when the lights off and then on again.

DMC810GL Instruction Manual Rev B.DOC