Gainbridge GT3088 Instructions Manual - Page 16

Browse online or download pdf Instructions Manual for GPS Gainbridge GT3088. Gainbridge GT3088 17 pages. Magnetic & portable gps tracker with

Gainbridge GT3088 Instructions Manual
Routetrack Sampling
Routrack Upload
Routetrack Off
Check Function
Setting
To Sleep
Call Sleep
Deep Sleep
Sleep Time
Timed Locate
Timed Locate
Address
Timed Locate map
Timed Locate off
Period Data Upload
*rsampling*1-999*
*rupload*60-999*
*routetrackoff*
*check*0-99*
*checkm*10-99*
*checkoff* / *check*0*
*tosleep*3-99*
*tosleepcall*3-99*
*tosleepsms*3-99*
*tosleepoff*
*callsleep*1-99*
*callsleepoff*
*sleep*1-99*
*sleepoff*
*sleeptime* 0-23*0-23*
*sleeptimeoff*
*timinglocate*XXXX*XXX
X**XXXX*
*timinglocateaddress*XXX
X*XXXX**XXXX*
*timinglocatemap*XXXX*X
XXX**XXXX*
*timinglocateoff*
*periodlocate*XXXXXXXX
**XXXXXXXX*
*periodlocateoff*
1-999 represents seconds of data collecting
interval, default as 10 seconds.
60-999
represents
uploading interval, default as 60 seconds,
minimum rate should not be less than 60.
End routetrack function.
0-99 represents hours of data upload
interval, default as *check*0*
10-99 represents minutes of data upload
interval
End check function
3-99 represents minutes of non-movement.
Enable sleep mode with call reminder after
appointed interval
Enable sleep mode sms reminder after
appointed interval
End to sleep function
1-99 represents hours of deep sleep period.
End call sleep function
1-99 represents hours of deep sleep period.
End interval sleep function
The first 0-23 represent start time, the
second one represent stop time, 24 hours
format
End sleep time function
XXXX
represent
minimum unit is 30 minutes, maximum
timing
setting
*timinglocate*0800*1100*1400*1830*
means 8am, 11 am, 2pm and 6:30pm of the
day
XXXX represent time and minus, minimum
unit is 30 minutes, maximum timing setting
is 10
XXXX represent time and minus, minimum
unit is 30 minutes, maximum timing setting
is 10
End Timed location function
XXXX
represent
minimum unit is 30 minutes, maximum
timing setting is 10
End period location function
16 / 17
seconds
of
data
time
and
minutes,
is
10.
EG
time
and
minutes,