Gainbridge GT3088 Instructions Manual - Page 7

Browse online or download pdf Instructions Manual for GPS Gainbridge GT3088. Gainbridge GT3088 17 pages. Magnetic & portable gps tracker with

Print Page

You will receive the following text: "APN is set to XXX. User name: XX. Password: XX"

6.2 Registering the "Master" Controller

SMS to the device:

phone number is +1XXXXXXXXXXXX. +1 refers to the country code. XXXXXXXXXXXX is the

cellphone number. Please make sure country code is included, and digit 0 is not needed before cell

phone number)

Device Response: "Cell Phone # xxxxxxxxxx is set to master controller, the password is 123456."

(The device has a default password of "123456" to initially program in your PDA/Phone.

NOTE: The device will ONLY listen and respond to instructions from this number unless you choose

to turn on the multi controller function and open the device to any cell phone number see NO.13 for

details.

6.3 Emergency takeover function

With the proper password, any phone number could takeover of full functionality under emergency

situation.

SMS:

*master*123456*+1XXXXXXXXXXX *

+1XXXXXXXXXXX. +1 refers to the country code.

XXXXXXXXXXXX is the cellphone number. Please make sure country code is included, and 0 is not

needed before cell phone number)

You will receive back a text that says: " Master controller change is successful for

+1XXXXXXXXXXX, the new master controller is +1XXXXXXXXXXXX."

6.4 Changing the Password

SMS:

*password*654321*

You will receive the following text: "The password change is successful for +1XXXXXXXXXX. The

new password is 654321."

7. Motion Detection Alert

The Master Controller will receive an alert (call or SMS) once the device detects vibration indictaing

possible motion.

7.1 Vibration sensitivity

The device you have purchased is equipped with a sensitive Vibration detection system. Since

certain applications are more sensitive to external vibration sources, the sensor has variable

sensitivity settings. The unit comes from the factory pre-set to #1, on a scale of 1-5, with 1 being the

most sensitive. If you notice you are getting excessive false movement alerts (like when a heavy

truck drives by), you can simply send the following SMS to the unit, and reset the variable:

SMS:

*sensitive*1-5*

1=3seconds continued vibrating

5=15seconds continued vibrating

Default setting is 1 (per the explanation above)

Device Response:

*master*123456*+1XXXXXXXXXXXX*

(654321 refers to new password)

(where X = 1-5, 1 being the most sensitive, 5 the least)

"Vibration sensitivity is set to 1-5."

, (For instance, master controller

(For instance, master controller phone number is

7 / 17