HID Mercury MR52-S3B Installations And Specifications - Page 16

Browse online or download pdf Installations And Specifications for IP Access Controllers HID Mercury MR52-S3B. HID Mercury MR52-S3B 19 pages. Reader interface

Print Page

Powering

Trusted Identities

3.1 Performance Levels

Evaluated to UL 294 7th edition and ULC 60839-11-1: Grade 2 and indoor dry.

Optional requirements of ULC 60839-11-1 items have not been evaluated.

Feature

ULC 60839-11-1

Standby Power

Endurance

Line Security

Destructive Attack

These specifications are subject to change without notice.

3.2 Warranty

Mercury Security warrants the product is free from defects in material and workmanship under normal use and service

with proper maintenance for one year from the date of factory shipment. Mercury Security assumes no responsibility for

products damaged by improper handling or installation. This warranty is limited to the repair or replacement of the

defective unit.

There are no expressed warranties other than set forth herein. Mercury Security does not make, nor intends, nor does it

authorize any agent or representative to make any other warranties, or implied warranties, and expressly excludes and

disclaims all implied warranties of merchantability or fitness for a particular purpose.

Returns must be accompanied by a Return Material Authorization (RMA) number obtained from customer service, and

prepaid postage and insurance.

3.3 Liability

The Interface should only be used to control exits from areas where an alternative method for exit is available. This

product is not intended for, nor is rated for operation in life-critical control applications. Mercury Security is not liable

under any circumstances for loss or damage caused by or partially caused by the misapplication or malfunction of the

product. Mercury Security's liability does not extend beyond the purchase price of the product.

3.4 Regulatory

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference

that may cause undesired operation.

The MR52-S3B board must be powered by an NRTL (Nationally Recognized Testing Laboratory) approved Class 2 Listed

Power Supply.

PLT-06451, A.1

Level

Grade 2

HID® Mercury™ MR52-S3B Reader Interface

Installation and Specifications

September 2023