HID Signo 25B Install Manual

Browse online or download pdf Install Manual for IP Access Controllers HID Signo 25B. HID Signo 25B 2 pages. Biometric reader/controller
Also for HID Signo 25B: Installation Manual (2 pages), User Manual (18 pages)

Print Page

HID

Signo

25B

™

Biometric Reader/Controller

Install Guide

13.56 MHZ/2.4 GHz Contactless

SRD Model: 25B

Supplied parts

• HID Signo Biometric Reader/Controller 25B (1)

• Installation Guide (1)

• Screw (1) – for attaching the reader to the backplate

Recommended parts (not supplied)

• Cable, 5-9 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and UL approved, Belden

3107A or equivalent (OSDP)

• Certified LPS DC power supply

• Security tool HID 04-0001-03 (for anti-tamper screw)

www.hidglobal.com/PLT-04027

• Scan the QR code or visit the link to see the multi-language electronic version of this

document.

• Lisez le code QR ou suivez le lien pour consulter la version française de ce document.

• Escanee el código QR o visite el vínculo para consultar la versión en Español de este

documento.

• Scannen Sie den QR-Code oder öffnen Sie den Link für die deutsche Version dieses

Dokuments.

• Faça a leitura do código QR ou acesse o link da versão em português deste documento.

• Scansiona il codice QR o visita il link della versione Italiana di questo documento.

• Отсканируйте QR-код или пройдите по ссылке, чтобы получить версию этого

документа на русском языке.

• 扫描 QR 码或访问此文档的中文版本的链接。

• この文書の日本語版を表示するには、 QR コードをスキャンするか、リンクをクリックします。

• QR 코드를 스캔하거나 링크를 방문하면 이 문서의 한국어 버전을 볼 수 있습니다.

1. Mount the mounting plate

ATTENTION

Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES

Screws not supplied.

2. Wire the 25B

2 Wire the 25B

Function Group Wire Color

RS-485

Pigtail wires

18" (0.46m)

Relay

Inputs

(Controller

mode only)

Wiegand Port

DC Power

Ethernet cable

Function Group Connector

18" (0.46m)

Network

RS-485 = Max bus length 4,000 ft - 24 AWG (1,219 m)

Max length between nodes: 1,640 ft - 24 AWG (500m)

Note: Bond the ground wires of the Signo 25B power supply and the panel power supply.

IMPORTANT: The 19 pigtail wires should be cut to size for wall mounted application.

IMPORTANT: The 19 pigtail wires and Ethernet cable may be cut for wall mounted

installation, if required. However, DO NOT cut the Ethernet cable shorter than

IMPORTANT: DO NOT cut the Ethernet cable.

6 inches (15.24 cm). If the reader is installed outdoors, the pigtails must remain

Note: Wiring the reader incorrectly may permanently damage the reader.

long enough to fit inside the mounting box to meet IP ratings.

Note: For readers with Tamper Evident Labels, inspect your reader after first unboxing. If any

Note: Wiring the reader incorrectly may permanently damage the reader.

seals are broken, please contact HID Technical Support.

Note: For readers with Tamper Evident Labels, inspect your reader after first unboxing. If any

seals are broken, please contact HID Technical Support.

Tamper evident labels (location may vary according to the reader model)

3. Secure the 25B to the mounting plate

4. Power and test the reader

5. Download and install HID Biometric Manager

https://www.hidglobal.com/signo25b

Visit

Biometric Manager Installer. Once the .exe file has downloaded,

double-click the file to install HID Biometric Manager, following the

on-screen prompts.

For further details, refer to the HID Signo Biometric Reader/

Controller 25B Administration Guide (PLT-04029), which is

available for download from

Function

AWG

Green

RS-485 A

Tan

RS-485 B

Black

RS-485 Ground

Gray

Relay – Common

Yellow

Relay – Normally Open

Orange

Relay – Normally Closed

Pink

REX Input (Supervised)

Gray

DPS Input (Supervised)

Black

Input Ground

Green

White

Brown

RED

Orange

Greeb

Yellow

BUZ

Blue

HOLD

Violet

TPR

Black

Ground

Red

Power +12V

Black

Power Ground

Function

Max Length

RJ45

328 ft (100 m)

Ethernet

socket

(CAT5/CAT5E/CAT6)

1. Insert the reader into the backplate.

2. Latch the reader.

3. Secure the reader to the backplate using the

supplied screw.

Light bar

Turn on the power.

The reader should beep and the light bar should flash.

Test the reader with a card.

The reader should beep and the light bar should flash.

Biometric reader

(requires set up in HID Biometric Manager)

and download the HID

https://www.hidglobal.com/signo25b

Max Length

4,000 ft

(1,219 m)

500 ft

(152 m)