Gainlab Audio GLA-MC1 Manual - Page 3

Browse online or download pdf Manual for Amplifier Gainlab Audio GLA-MC1. Gainlab Audio GLA-MC1 15 pages.

Gainlab Audio GLA-MC1 Manual
If the device has been exposed to rain or other moisture,
If the device does not operate normally
Do not connect the appliance to a mains socket to which an
electrical appliance controlled by an inverter, switching power
supply (eg. refrigerator, washing machine, microwave, air
conditioner) or a appliance with a motor is connected.
Depending on the use of the electrical devices, power supply
noises may cause a malfunction or audible noise on this unit. If a
separate electrical outlet cannot be used, connect a noise filter
between this and the other electrical appliance.
The unit heats up during several hours of continuous
operation. This is normal and not a cause for concern.
Turn off all devices before connecting the device to other devices.
This will prevent damage to speakers and other equipment.
Use of the unit near amplifiers or other equipment that contains a
transformer may cause noise. To resolve this issue, relocate the
device or move it away from the interfering device.
Noise may be caused by using a wireless communication device
near the device, such as a mobile phone. Such noise can occur
when making, receiving, and diverting a call. If you experience this
problem, move the wireless device away from the device or turn it
off.
This unit may interfere with radio and television operation, so do
not use near such receivers.
If the device is transported to a location with a very different
temperature and / or humidity, moisture may condense inside.
Using the device in this condition may result in damage or
malfunction. Therefore, wait a few hours for the moisture to
completely evaporate before using the appliance.
CLEANING AND MAINTENANCE
Cl
Clean the appliance daily with a soft, dry or slightly damp cloth. Use a
soft, abrasion-free cloth to remove stubborn dirt. Then wipe the device
with a dry cloth. Never use benzine, thinner, alcohol or other solvents,
strong alkaline or acidic cleaners as they may cause discoloration and
deformation.