AFG 2.0AS Assembly and Assembly And User's Manual - Page 13
Browse online or download pdf Assembly And User's Manual for Home Gym AFG 2.0AS Assembly and. AFG 2.0AS Assembly and 16 pages. Afg series
Also for AFG 2.0AS Assembly and: Assembly And User's Manual (15 pages)
Print Page
iI_ ii_i
i
5
_
i i
i I
W
il_ _ iii_i
_i _i! I_ i i_ i i_!!_i
_
i
ii
i
/ _ii
2.0 AS rev 1.2.indd
24-25
Yourhomegym is designed to be reliable and easy to use. However,if you experbnce a problem, please reference
the troubleshootingguide listed below.
PROBLEM: The
c ables feel rough and are noisy during use.
SOLUTION: Verify the foflowing-
IS THERE ANYNOTICEABLE DAMAGE TOTHECABLES?
IF YES..
,' Contact customer tech support and replace the cable(s).
IF NO:
, Verifythat all cables are secured into the pulleys.
o Verifythat the weight stack guide rods are lubricated.
o Verifythat there is no excessiveslack in the cables.
NOTE: If there is excessiveslack adjust cable tension (seenext page)
PROBLEM: Weightselector ph7cannot be hTserted.
SOLUTION,: Verify the foflowing-
ARETHE HOLES ALIGNED THROUGH THEWEIGHT PLATE ANDBAYONET?
IF YES:
Verifythat the selectorpin isn't bent or damaged.
IF NO:
, Adjust threadedbolt on top plate so that the holesin the bayonet align with the weight plate.
NOTE: A lways maintain at least ½"of weight cable screw threadedinto bayonet for safety.
the
problem;
discO,tin'
use.
Thefollowing information may be asked of you when you call. Pleasehave these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
In order for Customer TechSupport to serviceyour home gym they may need to ask detailed questions about the symptoms that are
occurring. Sometroubleshooting questions that may be asked are:
• flow long has this problem been occurring?
• Does this problem occur with everyuse? With every user?
• If you are hearing a noise, doesit come from the front or the back? Whatkind of noise is it (thumping, grinding, squeaking,
chirping etc.)?
• flas the machine been lubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service necessary
to get you and your AFGhomegym functioning again!
ii! :
Cleanfinessofyour homegym and its operation environment will keep maintenanceproblems and service calls to a
minimum. For this reason, werecommendthat the following preventivemaintenance schedule be followed.
AFTER EACHUSE(DALLY)
o Wipeupholstery,hand grips, bars, and frame (if needed) with a mild cleaning solution.
EVERY WEEg
, Lubricate guide rods with a spray or gel silicone lubricant.
o Inspect cable ends and cable insulation for damage.
EVERY MONTH- IMPORTANT!
o Inspect all frame bolts and tighten as needed.
Pleasecontact AFGwith questions about applying lubricant to your homegym.
ADJUSTING CABLETENSION
Regularly check the cable tension of your homegym. If excessiveslack
exists adjust cable tension by removing the pulley bolts and moving
one or both pulleys to the inner mounting position in the dual floating
pulley bracket and then reinstalling the pulley bolts. Cabletension
may also be adjusted using the threaded cable screw on single pulley
bracket and weight stack. Twist threadedscrew to adjust tension and
then tighten lock nut.
NOTE: A lways maintain at least ½"of threaded bolt in bayonet.
INNER
MOUNTING
POSITIONS
TWIST S CREWTO
_
CABLE SCREW
TWIST S CREWTO
_;;;_
CABLE SCREW
ADJUSTTENSION, _._J_AND
NUT
ADJUSTTENSION,
_
._J_AND NUT
THEN TIGHTEN
THEN TIGHTEN
LOCKNUT
LOCKNUT
"_SINGLE
PULLEY
BRACKETTHREAD
BAYONET
0°POSITION
FRONT O RBACK A CCESS
300 POSITION
FRONT O RBACK A CCESS
1500 POSITION
FRONT O RBACK A CCESS
900 POSITION
LEFT ORRIGHT A CCESS
This homegym allows you to choosethe angle of access to the weight selectionpin depending on howyou install the
upper and lowermounting brackets, weight plates, and weight shrouds.
NOTE: Makesure the upper and lower mounting bracket are in the same position.
/
i
ii
i ii
i
12/28/07
10:16:50
AM