Gainsborough H319 Instructions For Use

Browse online or download pdf Instructions For Use for Outdoor Light Gainsborough H319. Gainsborough H319 2 pages. Pk4 hanging colour changing solar lights

Print Page

Pk4 Hanging Colour Changing Solar Lights

H319

v001: 11/12//20

Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of

hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed

in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the

light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from

coming on, or cause it to turn off automatically

Please leave in Switched OFF mode during initial charging for

first 24 hours.

ALWAYS POSITION IN DIRECT SUNLIGHT

Dimensions

Each light is 7 x7 x10cm

•

HANGING SOLAR COLOUR CHANGING DIAMOND

SHAPED SOLAR LIGHTS

•

WITH COLOUR CHANGING LEDS INSIDE AND SOLAR

POWERED (LEDs not replaceable)

•

HANG FROM TREE BRANCHES, TRELLIS' ETC FOR A

SCATTERING OF JEWELLED LIKE COLOUR

Battery: 1x NIMH AAA rechargeable battery (included)

The product uses rechargeable

battery that is included

The ON/OFF switch is located at

the bottom of the light next to the

battery compartment

Turn ON switch to on the light

Turn OFF switch to off the light

The solar light has a light sensor so

when the lamp is switched on the

light will start automatically and

light up all dark areas located near

the lamp.

For first time use, it will take a full

day of sunlight to fully charge the

battery