Gainsborough H586 Assembly Instructions/Instructions For Use

Browse online or download pdf Assembly Instructions/Instructions For Use for Outdoor Light Gainsborough H586. Gainsborough H586 3 pages. 150cm light up acorn garland

Print Page

150cm Light Up Acorn Garland

H586

v001: 15/02/21

Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.

Find an ideal Place for the Solar Light.

Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of

hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed

in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the

light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from

coming on, or cause it to turn off automatically

ON/OFF

IMPORTANT:

Install the solar light in an area where it can get direct sunlight.

Leave the button in the "ON" position.

Dimensions

Length: 150cm

Battery: 1x Ni-MH AA 600mAh 1.2V

9 x Warm White LED Lights (not replaceable)

CHARGING AND OPERATION:

1. Firstly, press down button which is on the backside of the solar

panel to "ON" position for charging and charge by placing it in

direct sunlight for at least 8 hours. Secondly, press down the

button again to "OFF" position, the light will be off and stop

charging.

2. The light will work automatically after first pressing the button.

It will charge in direct sunlight during the day time and

illuminate at night.

NOTE: In order to check the solar function, firstly press down the

button; then place the solar panel in the sunlight; finally, cover the

solar panel with your hand and light should turn "ON"

automatically.

Always position in direct sunlight