Hiddn SafeDisk Installation Manual - Page 5

Browse online or download pdf Installation Manual for Storage Hiddn SafeDisk. Hiddn SafeDisk 13 pages.

Print Page

6. Zeroization

Zeroization clears all certificates and configuration, and reverts the unit to 'Personalization state'.

There are two ways to Zeroize (reset) the Hiddn SafeDisk unit – by pressing a physical button or using a Zeroize

CO card.

6.1 Physical button

For the SafeDisk with product number starting with SDM0-0 the Zeroize button is located close to the hole as

indicated by the black arrow.

For the SafeDisk with product number starting with LT02-0 the Zeroize button is located at the end of the unit

and for the LT02-1 unit on the side. The Zeroize button is pressed using a paper clip through the small hole.

1. Zeroize button needs to be pressed 1-2 seconds while the unit is powered on.

2. On Zeroization, the LED will blink green as the Zeroize process is started followed by red blinks

indicating that zeroization has completed.

3. Crypto Module is ready for re-initialization

6.2 Zeroize CO card

1. The CMS Zeroize action will produce a CO card with a signed Zeroize command targeted for the

specific Crypto Module. All the certificates and key material is cleared for this CM2, and it is possible

to start over and generate a new Initialization card for it.

2. Power on your computer.

3. Insert the Zeroize Key Token when the message "Waiting for Key Token. Please insert..." appears on

the screen.

4. Reading Crypto Officer Token...

5. Enter PIN:

6. By performing this action, all data on the Crypto Module will be lost! Are you sure that you want to

zeroize the Crypto Module? (Y/N)

7. Zeroizing Finished. Crypto Module is ready for re-initialization

Current RTC time is : XX.XX.XXXX XX:XX:XX

No valid SAM Certificate could be read. Is CM2 initialized?

8. Press F8 to adjust RTC or remove token to continue...

NB! If RTC time is outside period of SAM Certificate the module will not be functional.

Hiddn Security AS

Hiddn Safedisk Installation Manual LT02-IM-01-ENG-24.04.2018

http://www.hiddn.no

Page 5 of 12