80TAPE LIMBO III-COMPACT Manual - Page 3

Browse online or download pdf Manual for Recording Equipment 80TAPE LIMBO III-COMPACT. 80TAPE LIMBO III-COMPACT 3 pages.

Print Page

ARP Mode explained:

Arp mode is an experimental modulation mode where repeats are pitch shifted by an LFO. In this mode the

delay time automates to get the desired pitch shift. For example, say you set the delay time to 500ms, if the

octave up mode is selected then the delay time will alter between 500ms and 250ms. What happens is when

the delay time shifts to 250ms all audio that was recorded while set at 500ms gets played back twice as fast

and so comes out an octave up. After a period of time the delay will shift back to 500ms and so when this

happens all audio will come out as an octave down. Adjusting the modulation depth control will select the

pitch shift (shown below), while setting the modulation speed adjust the frequency of the shifts (how often

they occur) - this is all synced to the tap tempo, adjusting the delay set the base delay time.