AutomationDirect Productivity2000 P2-8AD4DA-2 Manual - Page 4

Browse online or download pdf Manual for I/O Systems AutomationDirect Productivity2000 P2-8AD4DA-2. AutomationDirect Productivity2000 P2-8AD4DA-2 8 pages.

Print Page

Module Installation

WARNING:

Do not apply field power until

the following steps are completed. See

hot-swapping procedure for

exceptions.

Step One:

Align module

catch with base slot and

rotate module into

connector.

Step Two:

Pull top locking tab

toward module face. Click indi-

cates lock is

engaged.

Step Three:

Attach field wiring using the removable

terminal block or ZIPLink wiring

system.

www.productivity2000.com

rotate

to seated

position

Align

with slot

Locked

Unlocked

QR Code

Use any QR Code reader application to

display the module's product insert.

Caution: If possible, remove field power prior to

proceeding. If not, then EXTREME care MUST be taken

to prevent damage to the module, or even personal injury

due to a short circuit from the live terminal block.

Important Hot-Swap Information

The Productivity2000 System supports hot-swap!

Individual modules can be taken offline, removed, and

replaced while the rest of the system continues con-

trolling your process. Before attempting to use the hot-

swap feature, be sure to read the hot-swap topic in the

programming software's help file or our online documen-

tation at AutomationDirect.com for details on how to plan

your installation for use of this powerful feature.

Tech Support 770-844-4200