Dynamax SAPIP-LTE Quick Start Manual - Page 3

Browse online or download pdf Quick Start Manual for Data Loggers Dynamax SAPIP-LTE. Dynamax SAPIP-LTE 10 pages.

Print Page



Type *** to enter USB command mode.



There is a list of USB commands available and can be downloaded from here.



Type "STAT" to check battery status, date/time, battery level, and logging status.



Type "MVER" to verify LTE version number, the latest version is 535



Type "SERNO" to verify LTE address, this is a 8-digit number that has to match with SapIP address on

agrisensors.net.



Type "AVRS" to verify heater voltage. Refer to downloaded document to change heater setting.



Type "INTER" to verify logging interval. Default interval is 15 (15 minutes). Refer to downloaded docu-

ment to change logging interval.



Type "ADC" to verify channel setting and labels. Refer to downloaded document to change channel con-

figuration. This has to be done via TeraTerm.

Section 2 — Verify SapIP Status