Hideaway Beds Beta Bed Single Assembly Instructions Manual - Page 9

Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Hideaway Beds Beta Bed Single. Hideaway Beds Beta Bed Single 20 pages. Wallbed frame and cabinet system

Print Page

Marking the Mounting Holes for the Lift Mechanism

STEP 2: Mount the Lift Mechanism

Note: Mount the Lift Mechanisms prior to assembly of the Bed Cabinet (STEP 4).

1. Exactly mark the mounting holes on the inside of each side panel from the dill pattern in Drawing 3.

2. Drill a 1/16" (2mm) pilot hole for each mounting bolt. Drill the final hole with a 5/16" (8mm) bit.

3. Counter sink 5/8" (15mm) on the outside of the panels just deep enough for the 5/16" x 1 1/4"

(8x32mm) Machine Screws.

NOTE: All location measurements are from the front edge of the Cabinet

Side Panels. Refer to Drawing 3.

Hole C

Hole D

Bottom Rear Base

Numbers in parenthesis ( ) are millimeters.

16.0" (406)

17 7/8"

(454)

11.0"

(279)

Drawing 3. (Drill pattern for SBLM Lift Mechanism)

2 5/16"

11 13/16"

(59)

(300)

17 9/16"

(446)

16 1/8"

(410)

14 7/16"

(367)

Hole A

Hole B

Hole E

FINISHED FRONT

EDGE OF PANEL

Front Bottom of Kick

BOTTOM EDGE OF PANEL