Hideaway Beds SwingAway Assembly Instructions Manual - Page 2

Browse online or download pdf Assembly Instructions Manual for Indoor Furnishing Hideaway Beds SwingAway. Hideaway Beds SwingAway 8 pages. Bed
Also for Hideaway Beds SwingAway: Assembly Instructions Manual (10 pages)

Print Page

Introduction

The SwingAway (CEHNT) systems are vertically and horizontally mounted wall beds that stand alone on

their own sub-frame, which must be fixed to the floor and wall. The bed can be mounted in a recess or

cabinet using bi-folding doors/similar or concealed using a curtain etc. or left on view. NOTE: Doors

cannot be fixed to the base of a SwingAway Bed. The counter balanced mechanism is suitable for use

with most sized standard mattresses. The maximum mattress depth is 8".

Note: it is essential that the bed assembly is securely fixed to floor and wall with correct fixings (not

supplied). Do not try to pull the bed down into the horizontal position unless it is fixed and by using

the pull handle.

IMPORTANT: If packaging is damaged check bed frame for any damages and all components are present.

If any items are missing contact you retailer immediately.

Component List



1 X BED FRAME (IN 2 PIECES) 'A' & 'B'



2 X BED FRAME JOINING BARS 'C' &'D'



2 X SPRUNG COUNTERBALANCED UNITS 'E' & 'F'



2 X WALL BRACKETS 'G'



2 X SUB-FRAMES 'H' & 'I'



1 X MATTRESS SUPPORT BAR 'J'



1 X AUTOMATIC LEG BAR (IN 2 PIECES) 'K' & 'L'



1 X PULL HANDLE 'N'



1 X PACK OF NUTS, BOLTS AND WASHERS



2 X BEDDING STRAPS

N.B. The bolts used have square shoulders, which are designed to pull into the frame when tight.

2 |

P a g e