AutomationDirect SureServo2 Quick Start Manual
Browse online or download pdf Quick Start Manual for Controller AutomationDirect SureServo2. AutomationDirect SureServo2 2 pages. 110/220 vac drives
Also for AutomationDirect SureServo2: Manual (18 pages), Quick Start Manual (4 pages)
Print Page
SureServo2 Motor Overview
Thank you very much for purchasing an AutomationDirect SureServo2 AC servo motor. Installation
and operation of this servo motor must be in accordance with the SureServo2 user manual. Failure to
read, fully understand and implement these safety instructions and precautions may result in damage
to the servo motor or its drive, the machine to which it is installed, or operator injury.
Cautions
• There are no field serviceable parts on the motor.
• Do not disassemble the motor.
• Any disassembly will void the factory warranty.
• Disassembly will cause permanent damage to the motor.
• Protect the motor from any splashing or airborne liquids.
WARNING: F
pRecAutIoNs mAy Result IN dAmAGe to the seRvo motoR oR Its dRIve
INstAlled
Mises en garde
• Il n'y a pas de pièces réparables sur le moteur.
• Ne démontez pas le moteur.
• Tout démontage annulera la garantie du fabricant.
• Le démontage causera des dommages permanents au moteur.
• Protégez le moteur contre les éclaboussures ou les liquides en suspension dans l'air.
Unpacking
Upon receipt of the motor, please perform the following:
1) Examine the appearance of the motor for any unusual marks.
2) Inspect the motor for any shipment damage.
3) Inspect the motor and ensure encoder leads have not been damaged.
4) Verify the part number indicated on the nameplate corresponds with the part number ordered.
If any items are damaged or incorrect, please contact your shipper or AutomationDirect.
Transportation, Installation, and Storage
• Do not carry or hold the motor by it's wire harness or shaft. Incorrect handling may cause damage to
the motor or personal injury.
• Do not hit the motor or shaft. Such shock can damage the encoder inside the motor.
• Do not apply axial or radial loads to the motor shaft that are in excess of the specified value.
• The shaft opening of the motor is not waterproof or oil-proof. Do not install the motor where harmful
gases or liquid are present, or in an environment containing excessive moisture or water vapor.
• Do not store the motor where it will come into contact with water, dust, corrosive gases or liquids.
• The material of the motor shaft is not totally rust-proof. To protect the motor shaft and prevent rust
formation, the motor shaft is coated with antirust oil at the factory before shipping. However, if the
motor storage time has exceeded six months, in order to ensure the motor shaft will not be rusted,
please inspect and examine the motor shaft and recoat with proper and sufficient antirust oil on the
motor shaft at least once every three months.
• Do not store the servo motor where it will be subjected to vibration or shock in excess of the specified
limits.
• Ensure that the storage of the motor meets the environmental specification as stated in the User
Manual.
• Protect the motor and encoder from high electrical noise
SureServo2 Motor Quick Start Guide – First Edition - 05/20/2021
,
AIluRe to ReAd
Fully uNdeRstANd ANd ImplemeNt these sAFety INstRuctIoNs ANd
,
.
oR opeRAtoR INjuRy
SureServo2 Motor Quick Start Guide
,
the mAchINe to WhIch It Is
Page 1 of 2