DB Research DB Drive WDX Mini 3000.1 User Manual - Page 8

Browse online or download pdf User Manual for Amplifier DB Research DB Drive WDX Mini 3000.1. DB Research DB Drive WDX Mini 3000.1 12 pages.

Print Page

C) REM ( REMOTE CONNECTION )

Run a remote turn on cable from the head units remote switched + 12V output.

WDX +12V, GROUND, REMOTE CONNECTION DIAGRAM.

SPEAKER CONNECTION

DB Drive recommends to use a minimum of 12 gauge speaker connecting cables. Run 12 gauge

speaker connecting cables from your speakers to WDX amplifier's mounting location. Keep

speaker cables away from power cables and WDX amplifier's input cables. Use grommets

anywhere the cables have to pass through the holes in the metal frame or sheet metal. Connect to the

speakers according to the type of the terminals on each speaker. Strip 3/8" of insulation from the

end of each cable and twist the cables strands together tightly. Make sure there are no stray

strands that might touch other cables or terminals causing a short. Crimp spade lugs over the

cable ends or tin the ends with solder to provide a secure termination. Connect the cable ends to

WDX amplifiers as shown on speaker system diagrams.

WDX MONOBLOCK AMPLIFIERS' SPEAKER CONNECTION DIAGRAM 1.

Ground

12V

BATTERY

8~ 1 ohms