ActiveProducts XE06 Owner's Manual - Page 5
Browse online or download pdf Owner's Manual for Pressure Washer ActiveProducts XE06. ActiveProducts XE06 10 pages. 1600 psi electric pressure washer
ASSEMBLY AND OPERATING INSTRUCTIONS
Surface Preparation
Before starting any cleaning task, it is important to inspect the area for objects that could
create a hazard. Remove any objects from the work area that could be tripped over, such as
toys or outdoor furniture. Ensure that all doors and windows are closed tightly.
Water Supply (Cold Water Only)
Only draw water through the unit. For use with cold water supply only. Water hose must be
at least a 1/2" (13 mm) in diameter. Flow rate of water supply must not fall below 2 GPM
(gallons per minute) [9.1 lpm (litres per minute)]. Flow rate can be determined by running
the water for one minute into an empty 5-gallon (19 L) container.
CAUTION
• Never use the pressure washer to draw in water contaminated with solvents (e.g.
paint thinners, gasoline, oil, etc.).
• Dirt in the water inlet will damage the unit. To avoid this risk, we recommend checking
the water filter (located inside the water inlet. To clean it out see Maintenance section).
• Always prevent debris from being drawn into the unit by using a clean water source
and an additional accessory water filter if required.
• To prolong the life of the unit, rest the unit for 5 minutes after every 30 minutes of use.
1
Assemble handle onto pressure washer
and attach hose bracket to handle. Tighten
the screws.
2
Connect detergent suction tube to the
bottle and attach to the handle.
7
ASSEMBLY AND OPERATING INSTRUCTIONS
3
Attach gun holder and power cord bracket.
5
Attach high pressure hose to the gun assembly
(hand tighten only).
7
Attach the inlet adapter to the machine's
water inlet. Hand tighten only. (Some models
come with inlet adapter pre-assembled.
Check your unit.)
4
Attach high pressure hose to the machine's
water outlet (hand tighten only)
6
Insert choice of wand to the gun and twist
¼ turn to lock in position.
8
Attach quick connect coupling to garden
hose (hand tighten only) and attach to inlet
adapter.
8