Gait up Physilog 6S User Manual - Page 4

Browse online or download pdf User Manual for Medical Equipment Gait up Physilog 6S. Gait up Physilog 6S 18 pages.
Also for Gait up Physilog 6S: Quick Start Manual (6 pages)

Print Page

1. Physilog 6S elements

2. Charging

The Physilog 6S is charged via the USB-C port. Plug the USB-C connector of the cable delivered

with the Physilog 6S to the sensor. Plug the USB connector to a Computer or charger (see

voltage specifications below). Physilog 6S recording must be stopped for charging. Do not

charge Physilog® when room temperature is outside of range 0°C to 45°C.

Low battery level is indicated by yellow blinking during measurement or if the Physilog® blinks

rapidly 3 times red when starting and doesn't start the recording (see LED indications below). A

battery level estimation is available via the Gait Up mobile applications. When the Physilog® is

discharged, plug it for charging for at least 30 minutes before use.

It is recommended to avoid complete discharging of the Physilog 6S, therefore check that the

Physilog® sensors are off when you store them. After a long period without using the Physilog®,

plug it for charging for at least 30 minutes before use. It may happen that the LED doesn't blink

white at the beginning of charging after the battery was very low, to see the charging ongoing

shortly push the main button or disconnect and reconnect after some charging time.

Physilog 6S user manual v1.0.0 Date: 08.01.2021