Dynamic DX-ECU Installation Manual - Page 13

Browse online or download pdf Installation Manual for Control Unit Dynamic DX-ECU. Dynamic DX-ECU 15 pages. Environmental control unit

Print Page

In the event of a fault indicator flashing while driving (battery gauge and/or Status

LED), the user must ensure that the system is behaving normally. If not, the system

must be turned off and a service agent contacted.

The switch contacts in the ECU are rated for 24V, 1A operation only. The DB9

common contact is rated for 2A only. Do not exceed these ratings in operation. In

particular, do not connect the ECU to AC mains.

Report any malfunctions immediately to your Service Agent.

Disclaimer

Dynamic Controls Ltd. products built today allow our customers' vehicles to

conform to national and international requirements. In particular to:

ISO7176, part 9

ISO7176, part 14 -

ISO7176, part 21 -

However, the performance of controllers fitted to wheelchairs and scooters is very

dependant on the design of the wheelchair so final compliance must be obtained by

the vehicle manufacturer for their particular vehicle. No component compliance

certificate issued by Dynamic Controls Ltd. relieves a wheelchair / scooter

manufacturer from compliance testing their particular vehicles.

If Dynamic Controls Ltd. controllers are fitted to vehicles or applications other than

wheelchairs or scooters, testing to appropriate standards for the particular

application must be completed as ISO7176 may be inappropriate.

Climatic Tests for Electric Wheelchair;

Power

Wheelchairs;

R e q u i r e m e n t s

Electromagnetic

Powered Wheelchairs and Scooters

GBK64227 - Issue 3 : August 1998

and

Control

a n d

Compatibility

Systems for Electric

T e s t Methods for

Electric