dB Technologies DigiPro OPERA D Series User Manual - Page 4

Browse online or download pdf User Manual for Speakers dB Technologies DigiPro OPERA D Series. dB Technologies DigiPro OPERA D Series 12 pages. Professional active speaker

Print Page
dB Technologies DigiPro OPERA D Series User Manual
DESCRIPTION
The models of the "OPERA D" series use cutting edge digital amplifiers of the DIGIPRO
series, providing three different powers - 200W, 400W, and 600W - to meet the
requirements of any kind of application.
These highly efficient amplifiers provide high power with limited weight and dimension.
OPERA 210D
Thanks to the low power dissipated, the cooling of the amplifier module does not require a
fan.
The OPERA 210D bi-amped active speaker is
equipped with a DIGIPRO amplifier delivering 150W
The digital preamplifier with DSP (Digital Signal Processing) controls the audio crossover
RMS for the bass section and 50W RMS for the high
of the acoustic components, the frequency response, the limiter, and the phase
frequency section.
alignment. A selector enables to select one of two different equalizations - "FLAT" or
"PROCESSED" - to provide high versatility for the different applications.
The 2-way bi-amplified speaker is equipped with 10"
woofer (1,5" voice coil) and 1" Neodymium driver (1"
The amplifiers DIGIPRO 400W e 600W use power supplies featuring SMPS (Switched-
voice coil) loaded with 80°/65°x60°asymmetric horn.
Mode Power Supplies) technology.
The speaker is plastic material and is provided with
This technology increases power supply efficiency and minimizes its weight.
top handle, rubber coated , easing its transport
The correct operation is signalled by the lighting of a blue indicator, located on the front
In the bottom of the box there is a standard pole mount
panel of the speaker. The indicator can be disabled following a specific procedure
cup (D36mm).
described in paragraph "Front LED" (Page 20).
The speaker has been designed to be used also as
stage monitor (43° angle).
OPERA 208D
The OPERA 208D bi-amped active speaker is
OPERA 410D
equipped with a DIGIPRO amplifier delivering 150W
The OPERA 410D bi-amped active speaker is
RMS for the bass section and 50W RMS for the high
OPERA 610D
equipped with a DIGIPRO amplifier delivering 300W
frequency section.
RMS for the bass section and 100W RMS for the high
The 2-way bi-amplified speaker is equipped with 8"
frequency section.
woofer (1,5" voice coil) and 1" Neodymium driver (1"
The 2-way bi-amplified speaker is equipped with 10"
voice coil) loaded with 80°/65°x60° asymmetric horn.
woofer (2" voice coil) and 1" compression driver (1.3"
The speaker is in plastic material, provided with
voice coil) loaded with 80°/65°x60° asymmetric horn.
recessed top handle, easing its transport.
The speaker is plastic material and is provided with
In the bottom of the box there is a standard pole mount
top handle, rubber coated , easing its transport
cup (D36mm).
In the bottom of the box there is a standard pole mount
The speaker has been designed to be used also as
cup (D36mm).
stage monitor (43° angle).
The speaker has been designed to be used also as
stage monitor (43° angle).
DRIVER
DRIVER
INDICATOR
LIGHT
INDICATOR
LIGHT
WOOFER
WOOFER
15
®
®
®
®
REFLEX HOLES
REFLEX HOLES
REFLEX HOLES
REFLEX HOLES
AMPLIFIER
AMPLIFIER
43° PLANE
43° PLANE
O P E
O P E
R A
R A
D D
O
O
P
P
E A
E A
R
R
D D
HANDLE
HANDLE
OPERA
D
OPERA
D
43° PLANE
43° PLANE
d
B
TECHNOLOGIES
d
B
I I
TECHNOLOGIES
I I
Æ 36mm PEDESTAL/BRACKET
HOUSING
Æ 36mm PEDESTAL/BRACKET
HOUSING
®