Dynamic CCTV DVR-8 User Manual - Page 18

Browse online or download pdf User Manual for DVR Dynamic CCTV DVR-8. Dynamic CCTV DVR-8 18 pages. 8 channel digital video multiplex recorder

Print Page

8 channel stand-alone DVMR

ALL ABOUT IMAGE RECOGNITION & PROCESSING

5) Playback Speed Setup

In playback mode, you can adjust speed of playback by pressing

[UP] or [DOWN] button easily. Just press [UP] button, and you

can increase playback speed from 1x to 2x, 4x, 8x, 18x, 32x, or

64x step by step. In playback speed from 2x to 64x, DVMR

system skips a certain numbers of pictures recorded in sequence

as per playback speed selected for fast search.

To the contrary, playback speed is down from 1x to ½ or ¼ by

pressing [DOWN] button, Playback speed lower than ¼ is

practically meaningless, and we recommend our users to freeze

picture by pressing [FRZ] button and move picture by picture by

pressing [LEFT] or [RIGHT] button for more precise search.

3. Operation

[UP] button

[DOWN] button

1X PLAY SPEED

1/2 PLAYSPEED

2X PLAY SPEED

1/4 PLAYSPEED

4X PLAY SPEED

8X PLAY SPEED

16X PLAY SPEED

32X PLAY SPEED

60X PLAY SPEED

CH-01

CH-02

CH-03

CH-04

CH-05

CH-06

03 / 10 / 25

16 : 11 : 38

12.34%

CH-07

CH-08

5.03%

PLAYBACK Speed Setup

8 channel stand-alone DVMR

ALL ABOUT IMAGE RECOGNITION & PROCESSING

3-4. SETUP

1. Basic Operation

In SYSTEM SETUP, we can change different parameters

for operation of DVMR system, as you like.

However, we basically recommend our users to set at

FACTORY DEFAULT, until you have full understanding

about operation of DVMR system.

To enter into SYSTEM SETUP, first press [MENU] button,

and enter password. After password, press [ENTER]

button and you can enter into SYSTEM SETUP.

In the first operation of DVMR unit after you first install

HDD or add 2nd HDD to DVMR unit, delete all data on

HDD, whether it is used HDD or brand-new HDD, and set

at FACTORY DEFAULT.

To go back to the very first SETUP condition recommended by manufacturer, set at FACTORY DEFAULT.

You can set at FACTORY DEFAULT all in one (as a whole) or group by group. When cursor is at

ALL SETUP, you can set at ON or OFF by pressing [ENTER] button. If you set ALL SETUP at ON, all

groups of settings are SET as per FACTORY DEFAULT recommended by manufacturer. If you set

ALL SETUP at OFF, then you are requested to set each group of settings separately one by one, ON or

OFF, and groups of settings set at ON shall be reset whenever you set at FACTORY DEFAULT.

To reset, you have to select ALL SET or each group of settings (ON or OFF), and then move to

RUN and press [ENTER].

Items remain unchanged even after FACTORY DEFAULT is done.

1. value of TIME/DATE SETUP

2. Date stored on HDD

3. ALARM LIST SETUP

4. ADMIN password

2. CAMERA SETUP

In camera setup, we have 3 different sub-menu as follows.

1) Edit camera title

Edit camera title.

2) Adjust color

Adjust brightness, contrast and others relating to color of

camera channel by channel.

3) Motion setup

Set motion detection area, sensitivity, and detection

window which specifies minimum size of object detected

by the system.

3. Operation

SYSTEM SETUP

CAMERA SETUP

TIME/DATE SETUP

RECORD SETUP

HDD MANAGEMENT

MISCELLANEOUS SETUP

TCP/IP SETUP

FACTORY DEFAULT

SELECT UP/DOWN , ENTER

SYSTEM SETUP

CAMERA SETUP

EDIT CAMERA TITLE

ADJUST COLOR

MOTION SETUP

SELECT [UP]/[DOWN] , PRESS [LEFT]/[RIGHT]

CAMERA SETUP