ADEMCO Ademco VISTA-40 Installation Supplement Manual
Browse online or download pdf Installation Supplement Manual for Control Panel ADEMCO Ademco VISTA-40. ADEMCO Ademco VISTA-40 16 pages. E2 zone programming
Print Page
®
A New Zone Programming and 5800 Wireless Device Enrollment Procedure
Important! Replace the existing procedures in your Installation Instructions with these instructions
&RQWURO 3DQHOV $IIHFWHG
•
Vista-40
•
Vista-50P
6XPPDU\ RI &KDQJHV
Enhanced Zone Programming Mode
•
Combined transmitter Serial number and Loop number entries on one screen.
•
Provided the ability to enter transmitter serial number, loop number, and confirmation in one step
by transmitting multiple times.
•
Added a message to indicate that you are in a Confirmation Mode.
•
Added the ability to copy the serial number from a previously entered zone (for multiple zone
transmitters), and then edit the loop number.
•
Added the ability to edit and delete a serial number at the input serial number prompt.
•
Added software to default to Contact ID format; removed fields 1 80, 1 81, 1 82, and 1 83, Customized
Dialer Format defaulting.
•
Removed the use of a "program tool" for programming transmitters.
•
Removed field 1 32, RF Receiver Type; only 5881 type receiver can be used.
Added Expert Programming Mode
The new Expert Mode allows you to:
•
Program zone attributes on a single screen.
•
Copy zone attributes from the last zone saved.
•
Copy a serial number from the last serial number saved.
•
Edit and delete a serial number at the input serial number prompt.
•
Enroll wireless keys using pre-defined default templates.
IN S TA LL A TIO N S U P P LE M E N T
(=21(352*5$00,1*
ARMED
READY
OFF
AWAY
1
2
A
MAX
TEST
4
5
B
INSTANT
CODE
7
8
C
READY
*
0
D
PANIC
VISTA-40, VISTA-50P, VISTA-50PUL
The 6139 alpha keypad is shown at
left. Note the locations of the A, B, C,
and D keys in particular, which are
STAY
used in conjunction with other keys
3
BYPASS
during programming.
6
CHIME
9
#
K4247
12/99