Dynamic Media SiriusXM Quick Start Manual

Browse online or download pdf Quick Start Manual for Radio Dynamic Media SiriusXM. Dynamic Media SiriusXM 2 pages.

Print Page

SiriusXM Music For Business Internet Radio Quick Start Guide

Start Here

1. Subscribe to the SiriusXM Music for Business Internet Service

To listen to the SiriusXM Music for Business Internet Service, you will need to subscribe to the service. Call

1-866-345-SIRIUS (7474) to subscribe and obtain your SiriusXM username and password (credentials).

2. Download the App

Using an Android or Apple device, go to the Google Play Store or Apple iTunes Store and install the

SiriusXM Music For Business app. Note that the Android or Apple device will need to be on the same

network as the Radio.

3. Connect the Radio

Connect the Power Adapter to the DC IN 5V connector, and plug the Power Adapter into an AC outlet. The

Radio will power on automatically.

Connect the Radio to a audio system using the provided Stereo Audio Cable, and turn on the audio system.

Select one of the network connection options that follow. Note that when you initially connect to a network, the

radio will download and install a firmware update. Don't unplug the power during the update. Normally, a solid

blue light on front of Radio indicates the update is completed. During the update the light will flash red and the

radio will be unresponsive until the update is completed.

Wired Network Connection (BREO or BREW) (recommended): To connect the Radio with a wired connection,

connect the Ethernet cable to the LAN connector of the Radio. Connect the other end to your local network.

Wireless Network Connection (BREW only):

Method 1: Use Bluetooth in your Android or Apple device.

Make sure there is no Ethernet cable connected to the Radio. Turn on Bluetooth® in your Android or

Apple device and have it near the Radio. Start the app and tap + at the lower right for Android app, and

upper right for iOS app, to find the Radio. The name of the Radio will be displayed if found.

Tap the Radio that is shown.

Tap your Wi-Fi network in the list and enter the Wi-Fi password, if prompted. Tap Save or OK to connect

to the Wi-Fi network. If the Radio has successfully connected to the network the light on the front of the

radio should be blue.

Method 2: Temporarily connect an Ethernet cable.

Temporarily connect the Ethernet cable to the LAN connector of the Radio. Connect the other end to

your local network. The Android or Apple device running the app will need to be on the same network

as the Radio. Start the app, swipe down the screen to find the Radio on your network. The name and the

IP address of the Radio will be displayed if found.

ap the Radio that is shown. When prompted, enter the default admin password 0000.

2. T

Tap Settings, tap Network Wizard, tap Wireless, tap Scan to see a list the of available Wi-Fi networks.

Tap your Wi-Fi network in the list and enter the Wi-Fi password, if prompted. Tap Save or OK to connect

to the Wi-Fi network. If the Radio has successfully connected to the network the light on the front of the

radio should be blue.

Disconnect the Ethernet cable.

The full User Guide may be found at: