Celexon HomeCinema Electric Tension screen Operation Manual - Page 7
Browse online or download pdf Operation Manual for Projection Screen Celexon HomeCinema Electric Tension screen. Celexon HomeCinema Electric Tension screen 11 pages.
Also for Celexon HomeCinema Electric Tension screen: Operating Instructions Manual (14 pages)
Print Page
Operation of the screen
Connect the power to the screen with the included power cord. Please pay
attention to a correct voltage supply (230V / AC). Do not lay the cable on hot
surfaces and avoid unnecessary tension.
Power connection
already wired 230V / AC
RJ12 Connection (For
RS485 commands)
In the box you will find an infrared and a radio remote control. To use the infrared
remote control, please use the enclosed IR receiver (h). Insert the jack plug into
the „ext. IR port „on the left side of the screen housing and place the receiver so
that it has line of sight contact with the IR remote control.
Operation of the remote controls
1. Press the „Up" button on the remote control. The screen
2. Press the „Stop" button on the remote control. The movement
3. Press the „Down" button on the remote control. The screen
will automatically drive to the upper stop position and
automatically stop.
of the screen is stopped immediately.
will automatically drive to the lower stop position and
automatically stop.
External IR connection
Trigger Connection
6