Dynamic Projection MH29 Quick Installation Manual - Page 5

Browse online or download pdf Quick Installation Manual for Projector Accessories Dynamic Projection MH29. Dynamic Projection MH29 8 pages. Mirror head

Print Page
Mirror Head Quick Installation Guide
For the full manual please visit
Adjust lens shift
Use the lens shift of your projector to adjust the position of the
projected image on the mirror as shown in the illustration.
(Mirror position for adjustment = power on position)
Mirror Head control unit / MHE01
DMX OUT
DMX IN
1
2
Backside view
1. DMX-OUT / Through Socket - 5 Pins XLR
2. DMX-IN Socket - 5 Pins XLR
3. Art-Net™ network - 10Mb/s, 100Mb/s
4. Mini USB OTG - for firmware update
5. RS232 connector - male
6. A/C power output; loop trough, 3-prong C13 female socket
7 . A/C power input; 100V / 2A / 60Hz - 240V / 1A / 50Hz, 10A max. 3-prong C14 male socket
8. Control buttons for menu navigation
9. LCD display
10. Control unit
Copyright © 2014 - 2022 by Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
http://dynamicprojection.com/mirror-head-assembly
Tilt-Motor
Axis
4
3
ARTNET / LAN
RS 232
ENTER
MENU
8
WENN NICHT ANDERS DEFINIERT:
BEMASSUNGEN SIND IN MILLIMETER
OBERFLÄCHENBESCHAFFENHEIT:
TOLERANZEN:
LINEAR:
WINKEL:
NAME
GEZEICHNET
Neumann
GEPRÜFT
GENEHMIGT
PRODUKTION
QUALITÄT
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
7
5 6
AC OUT
AC IN
10
OBERFLÄCHENGÜTE:
ENTGRATEN
UND SCHARFE
KANTEN
BRECHEN
SIGNATUR
DATUM
25.08.14
WERKSTOFF:
GEWICHT:
5
BCDEFGH
2
7
6
8
4
1.
Surface coated mirror
2.
Mirror Head control unit
3.
Mirror Head base plate
4.
Tilt motor
5.
Reference magnets
6.
Motor-drive-arm
7 .
Reference screws
8.
Pan drive shaft
9
Top view
ZEICHNUNG NICHT SKALIEREN
ÄNDERUNG
all rights reserved by
www.dynamicprojection.com
BENENNUNG:
Elektronik Frontansicht komplett
ZEICHNUNGSNR.
MASSSTAB 1:1
BLATT 1 VON 1
1
10
A3
QIG - Version 2.6