Aire WELKIN Instructions Manual - Page 9

Browse online or download pdf Instructions Manual for Fan Aire WELKIN. Aire WELKIN 17 pages.

Print Page

ELECTRICAL CONNECTIONS

WARNING: To avoid possible electrical shock be sure electricity is turned off at the main fuse or breaker box before

wiring.

NOTE. The Aire Control System for this DC motor fans is equipped with a learning frequency function which has 32

code combinations to prevent potential interference from other remote units.

The frequency on your Receiver and Transmitter units have been preset at the factory (Fig.12) No frequency change is

necessary, should you desire to install another Aire DC motor fan within the same home or area with a separate

frequency code please see the frequency interference' troubleshooting section of this instruction manual to learn how

to change the frequency.

Fig.12

Fig.13

Step 1. Receiver to House Supply Wires Electrical Connections Connect the WHITE wire (Neutral) from the outlet box to

the WHITE wire marked 'AC in N' from the receiver Connect the BLACK wire (Hot) from the outlet box to the BLACK

wire marked 'AC in L'from the receiver. Secure all wire connections with the plastic wire nuts provided.(Fig.13)

Step 2.If your outlet box has a GROUND wire Green or Bare Copper) connect this wire to the Hanger Ball and Hanger

Bracket Ground wires. If your outlet box does not have a Ground Wire, then connect the Hanger Ball and Hanger

Ground Wires together Secure wire connection with the plastic wire connector provided. (Fig. 14)

Step 3.Motor to receiver wires electrical connections Connect the 4P-4P for motor/ 2P-2P for light/ Gray-gray for

signal from motor to receiver.(Fig. 15) After all splices are made.check to make sure there are no loose strands. As an

additional precaution we suggest to secure the plastic wire connectors to the wires withelectrical tape.

Fig.14

Fig.15