HiFiMAN BLUEMINI Owner's Manual - Page 3
Browse online or download pdf Owner's Manual for Headsets HiFiMAN BLUEMINI. HiFiMAN BLUEMINI 6 pages.
Print Page
03
3.5mm Balance Plug
In playback mode, tap the power button once to start/pause playback.
To answer a call, press the power button once to answer. To reject,
please press and hold the power button 2 seconds. Press twice quickly
to finish the call.
Press power button for 8 seconds continuously to reset the
headphones when it cannot pair normally.
When using a computer as the audio input device, there is no need to install
*
drivers when the OS is WIN10 or MacOS. For WIN 8 and older, please turn to
hifiman.com service & support to download a suitable driver. If connected to
portable devices including mobile phones, the lack of a power supply may result
in faster than usual battery drainage. Not all devices can be connected by USB
mode.
In order to connect Bluemini to the Apple smartphone via USB cable, an
*
Apple-certified converter is necessary. And you can only turn to "USB mode
without charging" because of the limits of Apple devices' limits.
Bluemini
LED Light
USB Charging/Play Socket
Charging Button
Power Button
Bluemini
Operation Guide
When first connecting to a source via Bluetooth, press the power
button for 1 to 2 seconds to turn it on. Once the blue light flashes twice
to indicate that the power is turned on successfully, press the power
button twice to enter the pairing mode. The light will alternately flash
blue and green. At this point, check for it in the device's Bluetooth
connection list. Click Connect to complete the pairing.
To connect a paired Bluetooth audio output device, simply press the
power button for 1 to 2 seconds to turn it on. The blue light will continue
to flash at intervals. If the previously paired Bluetooth device is turned
on, it will try to connect automatically (the maximum number of
memory connected devices is 8; if no device is connected for more
than 10 minutes after the Bluemini is turned on, it will automatically
shut down).
Press power button for 5 seconds to turn it off.
To charge, connect the USB charging cable to the power supply and
Bluemini then it will charge automatically. While charging the light will
flash red and white and once fully charged the light will flash green and
white.
If the battery is low, a red light will flash.
To enable the USB playback mode, connect the audio device with a
USB cable to enter USB play mode. The light will flash red and white in
this mode.
When you would like to save the battery of portable devices and enter
USB mode without charging, press the charge button for 2 seconds
before connected to the devices. The red light will flash once. After that
you can connect the Bluemini with other devices without charging.
Please pay attention to the remaining battery for the Bluemini.
N.B.: USB playback mode can be used only if the audio playback
device and USB cable support audio playback. The choice of USB
cable may affect playback quality.
04