HiFiMAN HE400S Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Headsets HiFiMAN HE400S. HiFiMAN HE400S 8 pages.

Print Page

HIFIMAN HE400S

Headband Adjustment

If the ear cups do not comfortably rest on your ears, you can move the

sliding black block on each side of the headband to adjust the length

to suit the shape of your head.

To replace the earpads, ﬁrst carefully remove them by lifting the inner

tabs back. Then you will see there is gap between two screws inside

the driver. Insert the two adjacent plastic clips inside the earpads into

the gap. Use your middle ﬁnger to hold the earpads inside while your

thumb holding the outside. Push the earpads slightly with your thumb

until the remaining clips are inserted. Rotate the earpad so that it is

ﬁrmly installed.

①

②

Owner's Guide

③

Please allow for at least 150 hours of consistent playback to properly

break-in your new headphones. This break-in period does not have to

be at high volume.

The connectors utilize 2.5 mm mini plugs on the headphone side.

Push the connector straight onto the socket. Repeat the process with

the other mini plug connector.

The supplied cable adapter with the large

connected with the typical headphone output of an ampliﬁer or even

better with a headphone ampliﬁer. Please be aware that many home

ampliﬁers may mute the loudspeaker output when a headphone is

connected. For most portable audio devices, the smaller 1/8"

(3.5mm) jack may be used.

To clean your headphone, please use a soft, slightly damp cloth only.

Do not use any detergents and make sure not to let any ﬂuid enter

the open sides of the headphone. The pleather headband can be

maintained using standard leather care products. When your ear

pads become su ciently worn, you should replace them with a new

pair, available through HIFIMAN or through your local retailer. Note:

The internal drivers do not require maintenance. Any attempt to

remove or modify them will void your warranty.

www.hifiman.com

" (6.35mm) jack is