DBI SALA ROLLGLISS R550 User Instruction Manual - Page 8
Browse online or download pdf User Instruction Manual for Security Sensors DBI SALA ROLLGLISS R550. DBI SALA ROLLGLISS R550 16 pages. Rescue & escape device
Print Page
5.3
INsPECTIoN sTEPs: Per the intervals defined in Section 5.1, inspect the R550 Descender as follows:
step 1.
(See Figure 10) If the R550 Rescue & Escape Device is stored in a Humidity Resistant Case, inspect the
Humidity Indicator on the outside of the case (A). If the Humidity Indicator displays a reading of 60 or
greater (pie sector indicator): (1) Open the case and inspect the R550 Descender per the remaining steps.
(2) Maintain the case as described in Section 6.1.
step 2.
Inspect device for loose fasteners and bent or damaged parts.
step 3.
Inspect device housing for distortion, cracks, or other damage. Ensure the anchorage handle is
not damaged or distorted.
step 4.
The lifeline must pull through the device. Inspect the entire rope for cuts, burns, severely abraded
areas, and excessive wear.
NOTe:
step 5.
Device labels must be present and fully legible (see Section 8).
step 6.
Inspect for corrosion on the device.
step 7.
Inspect carabiners for damage, corrosion, and working condition.
step 8.
Inspect all system components and subsystems according to manufacturer's instructions.
step 9.
Record inspection results in the Inspection and Maintenance Log (Section 9) or on the i-Safe web
portal (Section 5.2).
5.4
uNsAFE oR DEFECTIvE CoNDITIoNs: If inspection reveals an unsafe or defective condition, remove the
device from service and contact an authorized service center for repair.
Figure 9 - i-safe™ RFID Tag
The rope sheath may become frayed during normal use.
Figure 10 - Humidity Resistant Case (9508289)
Pie Sector
Indicator Disk
8
Humidity
Indicator