DBI SALA Flexiguard 8530579 User Instruction Manual - Page 12

Browse online or download pdf User Instruction Manual for Industrial Equipment DBI SALA Flexiguard 8530579. DBI SALA Flexiguard 8530579 16 pages. Safrig fall arrest system

Print Page

Inspection Date:

Components:

Inspection:

Boom and Vertical

Inspect the Boom (A) and Vertical Mast (D) for structural defects or damage

Mast (Figure 2)

including bends, corrosion, etc.

Inspect all system fasteners to ensure they are tight.

Periodically apply grease to the Grease Zerk (located at the bottom of the

Vertical Mast to lubricate the internal Hitch Ball Pivot.

Anchorage

Make sure anchorage connection is free of corrosion, cracks, or other

Connection Points

imperfections that may cause malfunction during operation.

Labels

Verify that all labels are securely attached and are legible (see 'Labels')

PFAS and Other

Additional Personal Fall Arrest System (PFAS) equipment, winches, etc. that

Equipment

are used with the Flexiguard SafRig Fall Arrest System should be installed and

inspected per the manufacturer's instructions.

Outrigger Base

Ensure that the outriggers are not bent or cracked and that all hardware is

(Models 8530579

present and securely tightened.

and 8530607)

Serial Number(s):

Model Number:

Corrective Action/Maintenance:

Table 2 – Inspection and Maintenance Log

Inspected By:

(See Section 1 for Inspection Frequency)

Date Purchased:

Date of First Use:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Approved By:

Date:

Competent

User

Person