Dynamite Passport P2 Manual Addendum - Page 2
Browse online or download pdf Manual Addendum for Battery Charger Dynamite Passport P2. Dynamite Passport P2 2 pages. Plus 2 port ac/dc multi-charger
Print Page
SCAN TO GO
The Passport P2 can be automatically set with the SCAN TO GO feature by scanning
a compatible QR code. Check your battery for a compatible QR code. If you need to
add one, a QR code can be generated from within the Battery Memory section.
HOW TO GENERATE A QR CODE:
1. Add battery memory settings to match your battery.
2. Touch the QR code next to the battery memory, save it to the Gallery on your device.
3. Print the QR code and apply it to your battery.
Example settings shown, the app does not include any pre-
confi gured memory settings.
HOW TO USE A QR CODE:
1. Touch the SCAN TO GO button from the HOME screen in the Dynamite
Dashboard App.
2. The camera will open on your device, use this to scan the QR code.
3. When the QR code is scanned it will apply the parameters, press START to
begin charging.
© 2019 Horizon Hobby, LLC. Dynamite, Passport, and the Horizon Hobby Logo are trademarks or registered trademarks of
Horizon Hobby, LLC. All other trademarks, service marks and logos are property of their respective owners.
60946
LiPo BAL. CHARGE
cells:3
LiPo BAL. CHARGE
cells:6
LiHV BAL. CHARGE
cells:4
LiFe BAL. CHARGE
cells:2
HOME
Battery
Type
LiHV
NiMH
NiCd
PB
HOME
2
Current:2.0A
Voltage:4.20V
Current:10.0A
Voltage:4.20V
Current:4.0A
Voltage:4.35V
Current:1.3A
Voltage:3.6V
PROGRAM
SYSTEM
Battery
Operation
Cells
Mode
3
4
5
CHARGE
6
DISCHARGE
7
CYCLE
8
NEXT
SCAN TO GO
PROGRAM
SYSTEM
Created 12/2018