8STREME 5222 Series Manual - Page 9

Browse online or download pdf Manual for Swimming Pool Cleaners 8STREME 5222 Series. 8STREME 5222 Series 18 pages. Above ground automatic swimming pool cleaner
Also for 8STREME 5222 Series: Instruction Manual (9 pages)

Print Page

1. Product Features

Page 9

05 Indicator lights / LED

INDICATOR

LIGHT / LED

MEANING / DIAGNOS IS

When the power is plugged into the wall outlet and the

switch on the transformer is pushed to position 1 or 2, this

blue light should remain on to indicate that the power supply

is operating normally. If not, check if the wall outlet is

powered or replace the transformer.

It is a timer indicator. This red or orange light will light up

during the cleaning cycles (orange for 1 hour cycle - red for 2

hour cycle).

This blue light turns on when the floating cord between the

transformer and the No-Twist float with swivel union is

properly connected and you have turned on the robot. It

indicates that the current is reaching the float. If the light

does not come on, check the connections .

This green light only lights up when the robot pump is

running. This green light does not light up when the pool

robot has completed its cleaning cycle or during certain

phases of the device's operation (e. g. during a stop before a

change of direction ).

When the "No-Twist" float with rotating swivel is connected

to the transformer and you have started the robot, this small

red light indicates that the current is coming out of the float.

You must have both this red light and the blue light (C) on

the float. If you have the blue light on the float but not the

red light, then it is likely that you will need to replace the

float.