Galanz P180M18ASL-A0 Instructions Manual - Page 11

Browse online or download pdf Instructions Manual for Microwave Oven Galanz P180M18ASL-A0. Galanz P180M18ASL-A0 16 pages.

Print Page
Galanz P180M18ASL-A0 Instructions Manual
W
EIGHT UNIT SETTING
There are three kind of unit to be selected ("LB", "Kg" and "OZ").
1.
In standby mode, press ABC button repeatedly to select weight unit.
2.
Use number buttons to set menu code.
3.
Press ENTER button to confirm.
4.
Press START button to start.
NOTE: Each weight unit corresponds to 300 menus of the total menu, LB (001 to 300), Kg (301 to 600),
OZ (601 to 900). After selecting the weight unit, you only need to input numbers (001 to 300).
P
OWER SAVING MODE
In standby mode, if there is no operation within 1 minute, the oven will enter to power saving mode. The
display screen will turn off. The system will return to standby mode by pressing any button, the display
screen will light up and show "0".
C
HILD LOCK
The lock prevents unsupervised operation by children.
 To set the child proof lock: In standby mode, press and hold STOP button for 3 seconds, the oven will
auto enter child lock mode and the lock indicator light will turn on. In the lock state, all buttons are
disabled.
 To cancel the child proof lock: In child lock mode, press and hold STOP button for 3 seconds, the
system will return to standby mode the display will show "0".
M
-
ULTI
STAGE COOKING
Your oven can be programmed for up to 3 automatic cooking sequences.
Suppose you want to set the following cooking program.
Microwave-cooking
Microwave-cooking (with lower power level)
1.
Set the first microwave cooking program. Do not press START button.
2.
Set the second microwave program.
3.
Press START/QUICK START button to start.
NOTE: In setting or running the second or third stage of cooking, the display shows "
S
ETTING MEMORY FUNCTION
Lock memory setting function:
1.
In standby mode, press and hold PROG button until the the display shows "PROG", "
and "
".
2.
Press and hold number button 1 more than 3 seconds, "DE" beep will sound and the display shows
"PL", then the memory can't be programmed. Press number button 1 more than 3 seconds again,
the display shows "P", then the memory can be programmed.
NOTE: Memory functions include menu A/B/C cooking parameters, lamp mode, buzzer scale, power
saving mode, factory reset and other parameters and save them.
↓
10
" or "
"
", "
"