909 HG2000 Instruction Manual - Page 5
Browse online or download pdf Instruction Manual for Power Tool 909 HG2000. 909 HG2000 14 pages. 2000w heat gun
Print Page4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
The correct power tool will
Properly
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety rules for heat guns
•
A fire may arise if this appliance is not used with care.
•
Be careful when using the appliance in places where
there are combustible materials, such as inflammable
liquids, rags, wood shavings and the like.
•
Do not apply the heat to the same place for a long time.
•
Do not use in the presence of an explosive atmosphere.
•
Heat may be conducted to combustible materials which
are out of sight
•
Place the appliance on its stand whenever you place it
down and after use and allow to cool before storage.
•
Never leave the appliance unattended when in use.
•
Rags, cloths, cord, string, wood shavings and the like
should never be left around the work area.
•
Support the work properly.
•
If you are interrupted when operating the appliance,
complete the process and switch off before looking up.
•
When using the appliance, use safety equipment
including safety goggles or shield, breathing mask
and protective clothing including safety gloves.
Wear goggles
Wear earmuffs
Wear a breathing mask
•
Never attempt to use the appliance to dry animals,
clothing or hair.
•
Never use this appliance as a hair dryer.
•
Always use in ventilated areas.
•
Do not leave the appliance unattended when in use.
5
This