Galaxy Galaxy Top mount Use And Care Manual - Page 8

Browse online or download pdf Use And Care Manual for Ranges Galaxy Galaxy Top mount. Galaxy Galaxy Top mount 16 pages.
Also for Galaxy Galaxy Top mount: Owner's Manual (17 pages)

Print Page
Door Removal and Reversal Instructions
Tools Necessor
Ph
iDS
1@o0
Dr
Quodr6_
n6oo
5C+_WQT Vel
Ahonch Sot
_ _/_/
_
Pule/
_
Knife
AOIUSTOD
o
wreDcc
J
/
Door
Screw
J
stop
Washer
Hinge
DOOr Stop
J
DOOr
i --+°+°,
_j+
j_.]
+Ip+++
" /
Z_
++
Bott+m
DOOR
REMOVAL
AND
REVERSAL
iNSTRUCTIONS:
NOTE: The direction in which you r refrigerator doors open (door swing)
can 9e reversed, from left to right or right to left, by moving the door
hinges from one side to the other. Reversing the door swing should be
performed by a qual fied person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the wall outlet. Remove
any food from door shelves.
1.
Removetop hinge cover.
2.
Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
8.
Unscrew center hinge pin using adjustable wrench and save for
reassembiy. Ensure plastic washer stays on hinge pin
4.
Lift refrigerator door off of bottom hinge and set aside.
5.
Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tighten screws.
6.
Loosen two outside screws on opposite side of refrigerator, remove
inside screw and install center hinge.
7.
Remove bottom hinge with 8/8" hex driver. Reinsert two outside
screws in hobs and tighten,
nside screw wiii go to opposite side
in step 8.
8.
Remove two outside screws on opposite side of refrigerator and
install bottom hinge, insert and tighten screw saved from step 7.
9.
Unscrew bottom hinge pin using adjustable wrench. Move hinge pin
to other hob in hinge and tighten with adjustable wrench.
10. Move freezer and refrigerator door stops to opposite side. Before
starting screws, use an awl to puncture the foam.
11. Position refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close refrigerator
door to help align hinge hob.
12. Tighten center hinge pin with adjustable wrench.
13. Remove cabinet and hinge hob plugs and move to opposite side.
14. Lower freezerdooronto
center hinge pin.
15. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to install top hinge.
16. Replace top hinge cover.
17. Plug n electrical powercord and turn refrigerator temperature control
to center position. Adjust setting as necessary.