dbx Mini-Pre Specification Sheet - Page 2
Browse online or download pdf Specification Sheet for Amplifier dbx Mini-Pre. dbx Mini-Pre 2 pages. Vacuum tube microphone preamp
Also for dbx Mini-Pre: User Manual (13 pages), User Manual (12 pages)
Print Page
Mini-Pre
Vacuum Tube Microphone Preamplifier
Microphone Input
Connector:
Type:
Impedance:
Maximum Input Level:
CMRR:
Equivalent Input Noise:
Line Input
Connector:
Type:
Impedance:
Maximum Input Level:
Gain
Outputs
Connector:
Type:
Impedance:
Maximum Output Level:
dbx engineers are constantly working to improve the quality of our products. Specifications
are, therefore subject to change without notice.
A Harman International Company
Female XLR Pin 2 Hot
Electronically balanced/unbalanced
2kΩ
-10 dBu or +10 dBu with 20 dB pad engaged
Typically >80dB at 1kHz
Typically -125 typical dBu with a 150Ω source load "A-
weighted"
TS 1/4" Jack
Electronically unbalanced
>1 meg Ω
0 dBu or +20dBu with 20dB pad engaged
26dB to 60dB
Male XLR Pin 2 Hot and impedance balanced TRS 1/4"
Balanced/unbalanced
Balanced 600Ω , unbalanced 300Ω
(XLR) > +27dBu; (1/4") > +21dBu
System Performance
Gain Control Range:
+26dB to +60dB for Mic Input
+16dB to +50dB for Line and Instrument Inputs
Output Level Control Range
-∞ to +10dB
Phantom Power:
+48V
PAD:
20dB pad
PHASE:
Reverses pins 2 and 3 of the output XLR
Frequency Response:
10Hz to 45kHz (-3dB points)
THD+Noise:
0.08% typical at -10dBu out, 1kHz, 30 dB gain
"A-weighted"
Power Supply
Operating Voltage:
JA:
100VAC 50/60Hz
DO:
120VAC 60Hz,
EU:
230VAC 50/60 Hz
Power Requirements:
9VAC 1300ma (12 watt typical power consumption)
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
http://www.dbxpro.com