Dynapac CA 250 Workshop Manual - Page 6

Browse online or download pdf Workshop Manual for Utility Vehicle Dynapac CA 250. Dynapac CA 250 11 pages. Vibratory roller
Also for Dynapac CA 250: Workshop Manual (20 pages)

Print Page

FITTING

Fig. 3 Fitted M20 bolts

Fig. 4 Drum

Fig. 5 Fitting the second pad half

4. Fit the two M20 bolts

(items 4, 5 and 6 in drawing 38 22 20).

5. Run the roller slowly forward until the drum is lo-

cated with the first fitted drum shell at the bottom.

It may help to place a 25 mm (1") thick plank where

the edge of the first pad will be.

The space required for this operation is 3 meters

(120"). The pad half nearest to the platform/cab

must be about 100 mm (4") to the upper edge of the

drum frame.

100 mm

(4")

6. Lift the second pad half in place and align it against

the outer edges of the drum.

Make sure that no one is inside the work-

ing range of the machine when you drive it

forward.

Keep well clear of the hoisted object. En-

sure that hoisting hooks are securely

anchored.

CA 250/252/262 W1065EN2