ADEO CONTROL SP-C4-1 Installation And Use Manual - Page 8

Browse online or download pdf Installation And Use Manual for Accessories ADEO CONTROL SP-C4-1. ADEO CONTROL SP-C4-1 8 pages. Wifi super plug

Print Page

Adeo Group s.r.l.

Via della Zarga n. 50 - 38015 LAVIS (TN)

Tel: +39 0461 248211 - Fax: +39 0461 245038

Mail: [email protected] – www.adeogroup.it

Tips & Tricks

At this point, once inserted in the Control4 ecosystem, the driver can be used to switching: posts,

appliances, fans, electric heaters.

For example, if we have to control a Pellet Stove (and there is no specific driver), we can very easily control

it as a climate zone for heating control (... even remote!).

Pellet stove, with

control unit that must

support manual mode

Troubleshooting

ISSUE

The plug does not register to

the WIFI network

The plug LED flashes

The plug is occasionally not

controlled or takes a long

time to turn on / off

The plug turns off

automatically

Adeo Control

Super Plug

HELP

Check that the WIFI network is set to 2.4 GHz

Check that the WIFI network has the DHCP service active

Try repeating the registration procedure by bringing the plug and the

telephone closer to the WIFI router

The plug is not connected to the WIFI network

Check that it is installed in the radius of action of the WIFI router, and that

it has been correctly configured.

Repeat the registration procedure if necessary.

Check that the plug is not near other plugs or radio / WIFI devices that can

interfere with its integrated antenna

Check that the plug is close enough to the WIFI router to have good radio

coverage. Try moving it closer to the router

The plug may be in protection.

Check that the supply voltage is within the tolerance limits with respect to

230 V, or that the connected consumer does not absorb more than 16A

A d e o C o n t r o l è u n b r a n d d i A d e o G r o u p s . r . l .

Adeo Control

SP-C4-1

Device Manual

Control4 Z2IO

Thermostat V3

YATUN Software

(FREE)

Rev. 3.0

Pag. Pag. 8 / 8