DYNAPAR NorthStar HSD44T1024A3K Installation Manual
Browse online or download pdf Installation Manual for Media Converter DYNAPAR NorthStar HSD44T1024A3K. DYNAPAR NorthStar HSD44T1024A3K 6 pages. Extreme heavy duty encoder
Print Page
Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA
Visit us at www.dynapar.com
Encoder Installation Manual
NorthStar
™
brand
SERIES HSD44
Extreme Heavy Duty Encoder
Document No.: 702749-0001
Revision Level: E
January 15, 2019
SPECIFICATIONS
STANDARD OPERATING CHARACTERISTICS
Code: Incremental, Optical
Resolution: 1024 & 2048 PPR (pulses/revolution),
Format: Two channel quadrature (AB) with
Index (Z), and complementary outputs
Phase Sense: A leads B for CCW shaft rotation
viewing the shaft clamp end of the encoder
Quadrature Phasing: 90° ± 15° electrical
Index: 150° to 300° A leads B, CCW (From
Clamp End)
Symmetry: 180° ± 18° electrical
Waveforms: Squarewave with rise and fall times
less than 1 microsecond into a load capacitance
of 1000 pf
ELECTRICAL
Input Power: 5-30VDC. 80 mA max., not includ-
ing output loads.
Outputs: 7272 Differential Line Driver: 40 mA,
sink or source
Frequency Response: 125 kHz (data & index)
Noise Immunity: Tested to EN61326-1
Electrical Immunity: Reverse polarity and short
circuit protected
Termination: 18" pigtail or 18" pigtail with MS
Connector. See Ordering Information
Mating Connector:
10 pin MS, style MS3106A-18-1S (MCN-N6)
10 Pin, NEMA4 Style (MCN-N6N4)
Customer Service:
Tel.: +1.800.873.8731
Fax: +1.847.662.4150
MECHANICAL
Mechanical Interface: Electrically isolated
stainless steel shaft flex coupling
Coupling: 16mm, flexible
Mating Shaft Length: 0.47" to 0.625" (11.9mm
to 15.9mm)
Shaft Speed: 6000 RPM, max.
Bearings: 6107
Housing Material: Aluminum Alloy
Disc Material: PET
Weight: 4 lbs.
ELECTRICAL CONNECTIONS
Function
Pin
Wire Color
Sig. A
A
BRN
Sig. B
B
ORG
Sig. Z
C
YEL
Power +V
D
RED
Com.
F
BLK
Case
G
GRN
N/C
E
—
Sig. A
H
BRN/WHT
Sig. B
I
ORG/WHT
Sig. Z
J
YEL/WHT
Technical Support
Tel.: +1.800.234.8731
Fax: +1.847.782.5277
ENVIRONMENTAL
Operating Temperature: -30 to 100°C
Storage temperature: -40 to 100°C
Shock: 400g, 6mSec
Vibration: 5-3000 Hz, 20g
Humidity: Up to 98% (non-condensing)
Enclosure Rating: NEMA 6 / IP67
DATA AND INDEX
Not all complements shown
A shown for reference
(180° ELEC)
Data A
Data A
Data B
Index
Index Width: 150° to 300°
A leads B, CCW (From Clamp End)
NorthStar™ brand is a trademark of
DYNAPAR. ©2017 All rights reserved.
(90° ELEC)