Dynaplug DMPI-1311 Quick Start Manual

Browse online or download pdf Quick Start Manual for Power Tool Dynaplug DMPI-1311. Dynaplug DMPI-1311 2 pages.

Print Page

SPECIFICATIONS*

Max Pressure

Flow Rate

Weight

Air Outlet

Additional Fittings

Inflation Rate

Run Duration

Voltage

Max Current

Power

Noise

Motor

Dimensions

Power Cord Length

Recommended Fuses

Air Hose Length

Certfications

Warranty

Accessories, instructions, videos &

helpful hints

Customer Service

LIMITED W

ARRANTY

The period of Warranty is one year from the date of purchase by the original purchaser. Defects

in material and workmanship, which occur within the duration of the warranty, are covered with

some exceptions that are detailed on www.dynaplug.com. It's the responsibility of the

purchaser to provide dated proof of purchase, to contact [email protected] to obtain

warranty service options and to use reasonable care in the operation and maintenance of the

Inflator as described in this manual. Customer is responsible for warranty repair shipping.

TROUBLESHOOTING

√ Inflator does not turn ON

Push power plug firmly into receptacle, then twist it back and forth; check receptacle and plug terminals

for dirt (don't use fingers or metal); check vehicle's power outlet fuse—it should be 15amps minimum.

√ Inflator does not inflate

Be sure connector is on valve stem securely and well threaded. Check tire for leaks, and check hose

for breaks and leaks at fittings.

√ How to check/change the cigarette plug fuse

Unscrew tip of plug adapter, remove fuse and inspect. If

necessary, replace fuse with one of the same amperage.

√ Inflator is running slowly

The battery voltage may be too low. Check battery with a volt meter.

√ Tire is totally deflated

Sometimes a totally deflated tire can separate from rim and air can leak during inflation. If this

happens, you could jack up the tire before inflating it to allow bead to seat.

50PSI/3.5kg/cm

0.50cfm @ 0psi/14lpm@0psi

18.2oz/516g

Zero Loss Inflation Valve Stem Connector

Sports Inflator Tips (3)

7 minutes, 195/60/R15 tire

30 minutes/20 minutes cool down time

12VDC

6AMP

72W

69 dB

Geared, fan cooled

4.75"X6"X2"/120mmx150mmx50mm

9.34'/3.0m

Cigarette Lighter Receptacle: 15AMP

Cigarette Plug: 250V/15AMP

3.25'/1.0m

CE, RoHS, TUV Factory

Limited One Year

www.dynaplug.com or [email protected]

For information regarding operation or repair,

please call 1.530.345.8000

*Specifications subject to change without notice

DYNAPLUG® M INI P RO I NFLATOR D MPI-‐ 1

The Dynaplug® Mini Pro Inflator is the ideal product choice to inflate and to

maintain proper pressure in tires on motorcycles, vehicles, ATV's, trailers,

bicycles and in many other inflatables.

FEATURES A T A G

LANCE

Rugged and Compact ABS Case

•

Polyurethane Coiled Air Hose Stores Onboard

•

Bright and Efficient LED Work Light

•

Zero Loss Inflation Valve Stem Connector

•

Accurate, Easy-to-Read LED Backlit Pressure Gauge

•

PolarChex™ Polarity Protection

•

Power Cord Storage Compartments

•

RoHS Compliant Product

•

WARNINGS B EFORE U

Please read and save these instructions. Read carefully before attempting to operate.

Protect yourself and others by observing all safety information. Failure to comply with

instructions could result in voiding the Warranty, personal injury and/or property

damage.

For use with 12VDC outlet rated 10Amps or higher.

√

DO NOT leave Inflator unattended while the unit is running.

√

Over inflation can cause property damage and/or personal injury.

√

Never exceed the recommended pressure for any inflatable.

√

311