DBZ DMi 2/4000A User Manual - Page 5

Browse online or download pdf User Manual for Amplifier DBZ DMi 2/4000A. DBZ DMi 2/4000A 20 pages. Professional power amplifier

Print Page

●Please avoid using the power amplifiers in the following cases

- Exposed to splashes of oil, steam, such as near kitchen stoves, humidifiers and other places.

- Unstable surfaces, such as shaking tables or bevels.

- Exposure to excessive heat, such as in a window-closed car or in direct sunlight.

- Exposure to high humidity or dust accumulation environment.

●Do not place the power cable near the heater, otherwise it may melt, causing a fire or electric shock.

●When unplugging the power plug from the AC socket, please grasp the plug and do not pull the cable

directly. otherwise it will damage the power cord, resulting in a fire or electric shock.

●Please do not touch the power plug with wet hands. otherwise it'll cause electric shock.

●The power amplifier has ventilation holes on the front and back that can prevent the internal temperature

from becoming too high. Do not block these vents. Otherwise it may cause a fire.

In particular attention, please don't

- Turn the power amplifier upside down or put it sideways.

- Place the power amplifier in a poorly ventilated place, such as a bookcase or closet (not on a special

stand provided).

- Cover the power amplifier with a tablecloth or place it on the carpet and the bed.

●Please reserve enough space around the unit to facilitate proper ventilation. The size of the space

should be: at least 5CM from both sides, at least 10CM from the front and at least 10CM from above.

If there is no sufficient air flow, the internal temperature of the power amplifier may rise and may cause a fire.

●To mount several of the power amplifier on a standard EIA stand, please refer to the installation instructions

●When removing the power amplifier, firstly, unplug the AC power cord from the AC socket. And unplug all

connecting cables. Otherwise it may damage the cable, resulting in a fire or electric shock.

●When setting up this power amplifier, make sure that the AC power socket to be used is within reach.

If any problem occurs, please immediately turn off the power switch and unplug the power cord from the

power socket. Even if the power switch is turned off, there is minimal current flow to the product.

When you don't use the product for a long time, be sure to unplug the power cord from the AC socket.

●Do not expose the power amplifier to a location where it may come in contact with corrosive gases or

salt fog. Otherwise it may cause a malfunction.

●When connecting the speakers to the amplifier output, use the speaker-specific cables, other cables

may cause a fire.

●When connecting the power amplifier, please turn off all instruments, audio equipment and speakers.

Choose the correct cables and connect them as specified.

●Be sure to turn the volume control knob to minimum before turning on the power of this amplifier.

Otherwise a sudden outbreak of sound may damage your hearing.

●Do not use this amplifier for purposes other than driving the loudspeaker.

●If you are not going to use the unit for a long time, such as going on vacation. Unplug the power cord

Attention