Galaxy Control Systems 635 CPU Quick Steps - Page 2

Browse online or download pdf Quick Steps for Control Panel Galaxy Control Systems 635 CPU. Galaxy Control Systems 635 CPU 2 pages. How to flash daughter boards using factory port

Print Page
PART 4 - UPLOADING THE TARGET S28 FLASH FILE
Once you flash the first board, you can flash the next board without having to reload the target flash file.
9.
Go to the Factory Function page to begin the uploading process ...
10.
Click the Browse button and navigate to the appropriate Folder Path and select your target S28 file.
USB path X:\\Auxiliary\System Galaxy\FTS635\Factory Testing\S28\ your_model*\ your_board-type*\ Previous Version ...\
•
PC path
C:\\GCS\System Galaxy\FTS635\Factory Testing\S28\ your_model*\ your_board-type*\ Previous Version ...\
•
Take care to open the correct folders for your board-model (i.e. 600 or 635) and board-type (DRM/DPI, DIO, DSI).
11.
Select the correct S28 File that matches your Target Flash Version and click the Open button.
12.
You must click the Upload button in the Factory Function page to load the S28 File to the FTS-CPU memory bank.
( Live upload results will display in the Activity Log section of the web page. )
13.
Click OK button when the upload is completed. Your Target Flash Version will display in the Uploaded Column.
14.
Go to
PART 5 - FLASHING THE DAUGHTER BOARD.
DO NOT RESET THE CPU BOARD.
PART 5 - FLASHING THE DAUGHTER BOARD
15.
Click the Flash Version link that is shown beside the board type you want to flash - (i.e. 600 or 635 DRM/DPI, DIO, DSI, etc.).
16.
When prompted, enter the 8-digit serial number of the target Daughter Board as shown in the example below:
NOTE: The Serial Number must be exactly 8 digits. The serial number is on the printed label that is affixed to the board.
When typing the serial number, you must swap the first zero into the leading position – see examples below.
Examples of Serial Number Entry
Model
"30012 ..."
635 DRM 
"20012 ..."
600 DPI 
DO NOT DUPLICATE SERIAL NUMBERS
17.
Click the OK button to begin transferring flash to your target Daughter board.
The Activity Log displays progress indicators that show the board flash progress and flash verification progress.
If the Factory Test Station stops the flashing: make sure you clicked the correct Flash Version Link that is beside
NOTE:
your board-type and board-model. The Factory Test Station will not transfer flash if the selected link is for a board that
is different than the actual board you are attached to. Also, you can verify that you have uploaded the correct S28
Flash file. And that the FTS Ribbon cable is securely attached to the CPU and your Daughter Board
18.
When the Activity Log displays "flashing is successful", you will click the OK button.
19.
Press the Reset button (SW1) on the Daughter Board after flashing is successful, to complete the process. Do not reset the
CPU or you will have to reload your target flash file (that was loaded in Part 4).
20.
Disconnect the Factory Test Cable from the finished Daughter Board.
See the
System Installation QRS
21.
Connect the Factory FTS Cable to the NEXT Daughter Board at the Factory Test port.
22.
To flash your next Daughter Board you will return to
Doing so will delete the target flash file you just uploaded.
IF BOARD LABEL SAYS THIS
.
Boards will not function with duplicate Serial Numbers or Board_IDs
or
635 Hardware Installation Guide
YOU WILL ENTER THIS INTO THE FTS SERIAL NUMBER PROMPT
"03012 ..."
notice how the first zero has been moved from
"02012 ..."
the second position into the leading position.
for instructions on installing the board, as needed.
PART 5 - FLASHING THE DAUGHTER BOARD.
635/600 Daughter Board Flashing QRS
P a g e 2 of 2