High End Systems DL.1 Installation Instruction

Browse online or download pdf Installation Instruction for Light Fixture High End Systems DL.1. High End Systems DL.1 4 pages. Digital eye technology camera

Print Page

Before You Begin

Please note the following warnings and cautions before performing the procedure outlined in this

Installation Instruction.

Warnings: Disconnect power before servicing.

Equipment surfaces may reach temperatures up to 130° C (266° F). Allow the fixture to

cool before handling.

Open the Fixture

1. Lock fixture head in horizontal position.

2. Disengage the two latches (A) on the bezel and remove the back cover.

3. Remove the front bezel cover by turning two 1/4 turn latches (B).

4. Remove both side covers (C) by turning two 1/4 turn latches.

Install the Camera Module

1. Slide the camera module's

cable connector (D) straight

out and lift to install the

ribbon cable that shipped with

your kit. Insert ribbon cable

with the blue side up and

close connector.

2. Connect Camera Cable (E)

(p/n 90409161) to the camera

module below the ribbon

cable.

Installation Instruction

Subject: DL.1 Digital Eye Technology

Product Line: DL.1

60600239 Version 2.1

Camera Installation

Date: 11/20/04

page 1