High End Systems Universal Controller User Manual Addendum - Page 11

Browse online or download pdf User Manual Addendum for Controller High End Systems Universal Controller. High End Systems Universal Controller 12 pages.

Print Page

Data Format

This section describes the data format used by the commands described in this addendum.

Channel Voice Message Control

Control Change—used to set the Master Dim level:

1011nnnn

0ccccccc

where

nnnn is the channel number 0 to 15,

ccccccc is the control number 0 to 63,

and

Program Change—used to play back a Preset:

1100nnnn

0ddddddd

where

nnnn is the channel number 0 to 15

and

MIDI Show Control GO command

byte number

The preset number is one or two digits from 1 to 64. Digits are sent as ASCII characters; i.e., 30h

to 39h for the digits 0 to 9. Leading zeros are ignored; for example, preset 2 could be sent as 30h

32h, or simply 32h. Preset 15 would be sent as 31h 35h.

0ddddddd

ddddddd is the desired Master Dim level 0 to 99.

ddddddd is the preset number 1 to 64.

bit pattern

description

11110000

(F0h) Start of System Exclusive

01111111

(7Fh) Universal Real-time SysEx ID

0ddddddd

Device ID

00000010

(02h) MIDI Show Control Sub ID

00000001

(01h) General Lighting Command

Format

00000001

(01h) MSC Go Command

0ccccccc

Cue number ASCII digit 1

0ccccccc

Cue number ASCII digit 2

11111110

(F7h) End of System Exclusive

Addendum UN-1

Page 9