Autonics ADIO-EC Product Manual - Page 5
Browse online or download pdf Product Manual for I/O Systems Autonics ADIO-EC. Autonics ADIO-EC 8 pages. Remote i/o boxes
Print Page
Port Connections
■ Port specifications
• Be sure to check the port specifications below before connecting the device. Prepare a cable that complies with the protection rating IP67/IP69K.
Ethernet port
M12 (Socket-Female), 4-pin,
Type
D-coded
Push-Pull
Number of ports
Tightening torque
0.6 N m
Supported function
Daisy chain
• The example of communication cable for the PDCT port
Connector 1
5-pin
M12 (Plug-Male)
2
1
5
3
4
01. Connect to the EtherCAT
02. Connect the IO-Link devices
The maximum output current is 2 A at each I/O port. Configure the device so that the total current of the I/O ports does not exceed 9 A.
Check the wiring information in the manual of the IO-Link device to be connected.
I/O port
M12 (Socket-Female), 5-pin,
A-coded
YES
YES
2
8
0.6 N m
-
Connector 2
Wiring
Connector 1
Pin no.
USB Type A
1
2
1 2
3
4
3
4
5
01. Connect the M12 connector to the Ethernet port. See the connections below.
02. Connect the connector to the EtherCAT network.
03. Put the waterproof cover on the unused port.
01. Connect the M12 connector to the I/O port. See the connections below.
02. Put the waterproof cover on the unused port.
PDCT port
M12 (Socket-Female), 5-pin,
A-coded
YES
1
0.6 N m
USB serial communication
Connector 1
Connector 2
Connector 2
Function
Pin no.
Function
N.C.
1
+ 5 VDCᜡ
Data -
→ 2
Data -
0 V
→ 4
0 V
N.C.
-
-
Data +
→ 3
Data +
1
TX +
Transmit Data +
2
RX +
Receive Data +
3
TX -
Transmit Data -
4
RX -
Receive Data -
• Network device: PLC or EtherCAT device supporting EtherCAT protocol
1
+24 VDCᜡ
1
2
2
I/Q: Digital Input
3
5
4
C/Q: IO-Link, Digital Input/Output
4
3
5
Not Connected (N.C.)
Power supply port
Input: 7/8" (Plug-Male), 5-pin
Output: 7/8" (Socket-Female), 5-pin
N.A
2
1.5 N m
Daisy chain
0 V